broken or stretched. The belt will need replacing about once a year. Below are steps for checking the belt on your U5399-900. 1. Place handle in low position and turn cleaner over so bottom side is up
...belt broken, if so replace it, (very cheap) and only a couple of screws to undo, the roller not rotating will effect the power of suction dramatically, start from there and see how you go if i have ...
...belt is broken. The beater bar won't spin unless the belt is on nice and tight, but the hose part will work. Unplug the vacuum cleaner, look in your owners manual on how to replace the belt. You can ...
Broken wire in hose...Replace hose. Bad connection...Needs taken to an authorized Aerus service center for check and repair. If the power nozzle (suction at end of hose, but power nozzle doesn't work:
Question about Dyson Vacuums
...belt not broken nor slipping. Filters cleaned/ replaced, but still poor pickup. Checking for strength of suction, as recommended by Dyson, both at top of hose and at bottom right inlet revealed ...
belt is stripped or broken. One of the comments stated that the belt might be stretched. A cogged belt will never stretch. Well maybe, but I have never seen it in 24 years of servicing vacuums. If the
...belt may be broken or worn If your cleaner is not picking up fluff and hair from the carpet or has become heavy to push it is possible that the belt has snapped. This belt makes the sweeping brushes ...
33 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions