back (unplug it first!) and unscrew a clip on the rubber hose to release the plastic filter, you may find some coins in there, good luck! I have an aquarius washer dryer WD440 and the on/off button is
Question about Hotpoint Washing Machines
...back into the cone. Attach to the bottom to the drum and re-fasten the cir clip. Finally reconnect the gator to the pump unit and tighten the plastic clip. Check out the pump too before reconnecting. ...
...back out again should there be some sort of a clip on it. I trust this is the water heater you are referring to...There is a large nut 10mm in the centre of it this has to be tight,this in turn will ...
...clip) as I thought it would be this that was blocked but although I removed lots of rubbish from it it still overflows. The drum itself is not filling up with water. Has anyone got any advice as to ...
wd440 Hi all when the drum spins whilst washing or drying program anti or clockwise there is a knocking sound coming from the drum, like something is clipping it on the way round not in the same place
...back in the hose, there are 2 slots which will locate on two ribs on the drum 7) Refit the hose and re-tighten the jubilee clip. Plug off the wall. Open up behind the machine. Check to see if any ...
clip, fix the plasic shell back onto the back of the machine... plug machine back in... push machine back into position.... taking care not to slip on wet floor. approx fix time... 2 hrs to google for
Question about Hotpoint Washing Machines
back together Machine is now tripping the electricity!! Its driving me in sane, anyone any suggestions plsss ?? check that your skin pipe is not blocked....happend to me with different make washer....
...wd440 Remove front kick plate at bottom of the machine and see if there is a filter behind it. If not you need to remove lower back panel from machine, then remove sump hose, (Large black hose ...
907 questions posted
Usually answered in minutes!
886 Questions
541 Questions
485 Questions
500 Questions
151 Questions