Question about HP LaserJet Office Equipment & Supplies
...printing reds and oranges correctly ? they are faded. Changed the toners & no difference Print a "Config Report" from the printers menu...If u notice that the fourth square on the left side ...
Question about HP LaserJet Office Equipment & Supplies
...wait until half page goes inside the printer, then immediately open the printer cover, printer stops and the half-printed page remains out of fuser unit. Carefully remove the print cartridge and ...
My 3055 simply stopped scanning (I get a not set up for PC error when I try to scan). I suspect that what I have going on here is a problem set up by a MS update. Scanner worked fine a couple of days ...
Question about HP LaserJet Office Equipment & Supplies
...stop. Keeps doing this and will not allow any printing or anything. Have to shut off, then will work for a few minutes and then same. The scanner blub mirror needs to be cleaned and possibly the ...
Question about HP LaserJet Office Equipment & Supplies
...usually work fine. It would power up, move the scanner head back and forth, the scanner head would stop moving and sort of park itself at one end of the scanner. Then the "scanner bulb failure" ...
Question about HP LaserJet Office Equipment & Supplies
HPcolor laserjet 2840 clicking with message "scanner bulb warming clicking then stops and message "scanner error 5 turn off then on" appears. Tried unplugging power after turning off machine. Still ...
Question about HP LaserJet Office Equipment & Supplies
...you will, the end of there travel across the glass. If they can't "see" where they are supposed to stop they try to keep going, reaching the end and causing the noise you describe. The noise is the ...
Question about HP LaserJet Office Equipment & Supplies
have a Color Laserjet 3600n printer. It keeps on calibrating without stopping when I switch it on. why ? thank sin advance. I have a Color Laserjet 3600n printer. It keeps on calibrating without ...
Question about HP LaserJet Office Equipment & Supplies
How Do Stop Scanner Bulb From Warming Up? The printer is fine until I scan a document. Then I get a message that the scanner bulb is warming up and the scan bar keeps going back and forth. I cannot ...
...cartridge to see if toner seal tab has been pulled out Most times the problem is the selenoid that stops the carousel in the correct position to lay down each color for each page. Sometimes the ...
28 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions