...margin settings have been changed, it sounds like you may have a defective drum. You can try carefully cleaning the corona wire, a hair thin wire, with a dry cotton swab. Do not touch the drum! The ...
Question about HP LaserJet Office Equipment & Supplies
...touch and print comes off , brand new HP cartridge put in but still having problem You need to either replace your fusing unit or have someone replace just the fuser film. This is somewhat common on ...
Question about Brother Office Equipment & Supplies
change the margins to narrow. you'll decrease the right margin but not the left margin which accdg to my research, is the space needed for the ptouch to print. You can't, those spaces are the default
...change font and just prints on the top 1/2 of the label Problem is solved by pressing the function key until "margin" comes up. Then press function key again while "margin" is selected. Use the arrow ...
...touch brother label maker,pt 1880. and i cannot get it to stop printing too much tape at the beginning of the word. the margin setting only changes the end of the word. please help thank you Hi, it ...
Question about HP LaserJet Office Equipment & Supplies
...touch this without a glove or lint free cloth. not hard job to change if you can get one in your area if not we have them available. laserguy@nbnet,nb,ca remove the fuser cover located in the top ...
Question about HP LaserJet Office Equipment & Supplies
...touch the paper during the time. You can change the Ink Drying Wait Time at Custom Settings on the Maintenance tab of the printer driver. When you perform the automatic duplex printing for Hagaki, ...
...margin only. I'm guessing you have a laser printer. There are three thing s you might try/check. First check the printer settings to make sure you have the correct paper type (if you try to print on ...
Question about Epson Office Equipment & Supplies
...change the setting and checked it again, everything was correct. Also the printout was ambiguous. I opened the AB door and discovered that the image was partially left on the film of transfer unit. I ...
199 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions