Question about OKI Office Equipment & Supplies
...drum, changed drum and still says "change drum", will not print..... After replacing the image drum cartridge, reset the drum counter to keep a correct count of the number of pages printed on the ...
Question about Dell Office Equipment & Supplies
...drum to do this print something and when the printer start to pull the paper stop the printer by open a door. then pull out the toner cartridge and look the drum if the image seems ok If you see bad ...
Question about HP Office Equipment & Supplies
...Imaging drum is empty or missing (Error 40204) Light pattern Description The imaging drum is empty or missing. The imaging drum light is blinking, and then printer stops printing. An error 40204 is ...
...changed the toner cartridges but you may also need to do the following as well. Imaging drum is low Light pattern Description The imaging-drum light is on. The printer continues to print without any ...
...changed ink cartridge but the problem persists. Any suggestions? Duplicated images on pages is either the drum, or fusing/setting unit. Since this is an all in one unit, I am assuming the ink/toner ...
...changed our drum unit but the drum light is still flashing. The printer is printing though. Any suggestions? If you mean the image drum then you can use it until the print quality is really bad or ...
...changed the toner unit, was this before the fault or after? under where the drum/toner cartridge sits there should be a Black 'transfer' roller that will line up with the drum surface when inserted- ...
...changed all the cartidges and still have light copies Hi katie44l: Depending on the eviroment the printer is in depends on weather you have dust on the laser lenses. If you are in a dusty eviroment ...
Question about Dell Office Equipment & Supplies
after changing toner it displays the call service 7410-0066564 the toner is good put the printing is not clear. after i remove it and ples it back, and displays the error call service 7410:0066564 and
transfer to the paper. If the drum is wearing down the image will become poor. Changing the drum unit will make the image like new. So, yes you can run the drum catridge until you get a poor print out
592 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions