Epson Stylus Photo 1200 InkJet Printer "timing belt" Questions

print carriage problem we have an R230 printer, and the belt on the ink kcarriage had been broken/ cut. how will we remove the ionk carriage so we can put the belt back.. please help, got urgent ...

I have a Epson Photo Stylus R1800 printer. All of a sudden the ink cartridges won't move over to print. I used the troubleshooting and epson said it was a repair issue. I no longer have warranty and ...

...already have installed perfectly the catridges ? SOME TIME CARTRIDGE IS FAULTY IN NEW MACHINE. PLESE CHECK THE SCANNER AND CHECK THE TIMING BELT. IF NOT PLESE OFF PRINTER AND REINSTALL ALL

the print head doesn't appear to be connected to The print head doesn't appear to be connected to the belt drive on my Epson C62. Is there a clip that has come undone that I can re-attach?  Prior

...timing belt, drive belt, gearing and rollers all look normal. 4. Take the network out of play when doing the initial troubleshooting 5. With the computer off, unplug the printer's power cord and USB ...

...timing belt start rotating making a big sound. Printer stop working and "orange bulb" indicate. What should I do? Please explain this situation. Thanks. the problem you have is most likely to do with ...

after replacement of waste ink pads and cleaning the heads on my epson 2200 head moves fully to right, couple inches left, right again, the full to the left were it strikes the end and then the motor ...

My epson r2400, On power up the printer goes through it start up sequence then after about 2 mins the carridge stops on the left hand side of its track and all the lights go out. the printer haed seem

...Timing Belt must be free from any defects and the belt must be in proper tension. 3. The carriage must slide smoothly, free from undue load. 4. Measure the resistance value of the CR Motor. ...

...Timing Belt must be free from any defects and the belt must be in proper tension. 3. The carriage must slide smoothly, free from undue load. 4. Measure the resistance value of the CR Motor. ...