side instead of going across smooth like it normally does to print.how do i put the piece back in? The encoder strip is most likely the problem. Unplug the power from the printer. Open the front cover
...black #28 cartridge into the slot on the left side and push it down. Slide the color #29 cartridge into the slot on the right side and push down. 7. Push the gray plastic cover down over the #28 ...
Question about Lexmark X Office Equipment & Supplies
...black #28 cartridge into the slot on the left side and push it down. Slide the color #29 cartridge into the slot on the right side and push down. 7.Push the gray plastic cover down over the #28 ...
Question about Lexmark X Office Equipment & Supplies
black small box the one is conected to the power cord and it works!! but now my scan bar don't stop start like normal when reach (left to rigth) the other side. Did I put any connections backworks
...black #28 cartridge into the slot on the left side and push it down. Slide the color #29 cartridge into the slot on the right side and push down. Step 7Push the gray plastic cover down over the #28 ...
Question about Lexmark X Office Equipment & Supplies
...side; there is a good picture of it on this site). The solution for it, as many had said, was to to pull down and forward the encoder strip so it could fit into the slot on the back of the cartridge ...
Question about Lexmark X Office Equipment & Supplies
...side of my printer It could be due to the cartridges or the encoder strip (transparent strip found behind the cartridge carrier) has gotten loose from its position. Please follow steps below to ...
Question about Lexmark X Office Equipment & Supplies
side when power up? if so encoder strip is dirty or incorrectly seated... plastic strip inside printer lines on it 1cm wide, must sit vertical in slot on carriage Might be somethin stopping print head
Question about Lexmark X Office Equipment & Supplies
...black ink cartridge is missing...I have put 3 different new ones in It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ ...
...black ink will not print. I purchased and put in a second print cartridge, #16, but it did not help. I triple checked that the peice of tape lexmark puts on the cartridge was removed and have cleaned ...
63 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions