Philips MX5600D System "tv mode av" Questions

...mode(ie.av,scable,tv.etc...)then make sure its in the right mode for say if you want to use the avs instead of the cable(ie.m,d/k etc..)this should solve most problems especially if you bought yours ...

tv remote, how to get to dvd mode but like I said scrolling. Please help. This cable is called a composite cable. You will use the yellow for video and the red and white for audio. your best bet would

tv mode i have no manual-is set up wrong Make sure your TV has an audio output (many TV's do not). If the TV has no audio output then run either a red/white AV cable or a digital audio cable from your

...TV mode, then take out the red and white AV cable, go buy a digital audio or SPDIF cable, and plug in the digital audio or SPDIF cable from the digital audio OUT of your TV or cable/satellite box to ...

...TV is selected, I get an echo Samsung HT_BD1250 ? Try pressing the MODE button on the remote control and set the unit to MATRIX. You can see this on the front panel of the unit. ? Or try setting up ...

...mode, only right front and sub have sound. I've checked all the settings on my HTS and my Vizio TV according to all the info I could find. Turned speakers up on the system via the remote. Still same ...

then connect the other end to audio or AUX input on the Surround sound, push the function button on the surround sound until you get to AUX mode and bang, you got TV audio from the satellite or TV box

tv. No sound through surround sound. Only when I plug in the av cables from box to surround sound system can I hear the sound through my surround sound system. This wouldn't be a problem except that I

...tv via HDMI I get a message that say mode not supported change resolution...I can not access the br menu when this happens to reset the res...and holding the stop button for 5 sec doesnt seem to help ...

...mode do I have to put both tv and DVD on? You first should hook the device up with AV cables, after you uses AV cables , you will get a picture, once you get a picture, you need to go into the setup ...