Lexmark Wheelwriter 1500 Typewriter "2 print problems" Questions

...2. print type light yet it seems to be striking with enough force. Can I adjust the strike pressure some how?DM Put in a multi part form and type if the print is good on the carbons the problem is ...

...print solenoid plunger if that dosen't help the pad will need replaced. It is a little tricky. The sol is located just inside the L. sideframe of the printer under the ribbon, round about 1 1/2 in ...

...print the correct letters. It is a problem with the Daisy Wheel? look for bent or broken spokes on daisy wheel .turning unit off for 20 seconds and back on should reset the daisy wheel home position. ...

...2) on which the hammer suddenly stopped making contact with the ribbon after years of use. I replaced the solenoid cap and the hammer now works -- so far, so good! However, the print selector has ...

bottom part of lower case letter not printing If the problem is just one character that is not printing the bottom then the printwheel is damaged and will need to be replaced. If it is all of the ...

...2 black latches are lined up with the side frames then press down firmly on both sides of the platen. DickyO Problem with Wheelwriter 30 - full letters print but they are light or missing parts - ...

...2 adhesive labels stuck to th silver plate beneath the black rubber roller. Since I cleaned that up, I can't get the bottom half of the letters to print. I have solved the problem. It turned out that ...

...2, the bottom half of the letters are not printing. It is not the ribbon because I have changed it out. Two things come to mind for this problem. First try pushing down firmly on both ends of the ...

...2 do Hi adirag! This is directly out of the user's manual! Clear Carrier Jam These are possible solutions. Try one or more of the following: Remove any obstructions Raise the scanner unit. Remove any ...

2 by Lexmark When I press the Paper Up Button it will print something that is stored to this key. How do I clear it? The paper up button shouldn't print anything you beither have a keyboard problem or