Wheelwriter 30 Series 2 I've just changed my ribbon cartridge. It is in place, but the ribbon is not moving so as I am typing, the letters keep striking over each other. First off make sure the ribbon
Question about IBM Office Equipment & Supplies
...ribbon move pull the red lever on the right toward you, drop the ribbon in turn the knob a few times in the direction of the arrows, move the red lever back done. The other style move the lever, drop ...
ribbon will not move when typing If this is a wheelwriter remove the ribbon, mark the driver on the ribbon deck with some white out, type and see if it moves. If it moves try a new ribbon, if it dosen
...If the hammer did not move or the ribbon did not advance, the typewriter will require service. If the typewriter still does not make an impression on the paper, your typewriter will require
...We've looked at the knob on the left side where the ribbon sits. It seems to move. The knob on the ribbon also moves. Any suggestions? If the knob is moving you probably have a bad ribbon. ...
Question about IBM Office Equipment & Supplies
move into the ribbon. DickyO A VERY common problem is that users will fit a new ribbon, and (for reasons that will remain a mystery) then wind the knob clockwise, despite the clear markings to wind it
IBM WW1000 ribbon advance not working, I have checked the ribbon motor and ribbon feed follower + spring all seem OK, Is this a function board or anything I may be missing. Be sure the Ribbon ...
Question about Smith Corona Office Equipment & Supplies
...not turn to move the ribbon. if the knob on the ribbon cartridge doesn't move the ribbon when you turn the knob the direction of the arrow (on the cartridge next to the knob) you need a new ...
...ribbon as I type, but the left spool won't move at all; and then when I flick the switch again to change directions, the left spool will output ribbon but the right won't budge. Meanwhile I've been ...
Question about Nakajima Office Equipment & Supplies
The ribbon is not moving. typing in same spot only. If the ribbon is just moving a little you may be in the overstrike ribbon mode try code period, comma or slash I can never remember which to get out
441 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions
