Question about Brother Office Equipment & Supplies
typing different letters than the letters i am striking Your are on the wrong keyboard setting. Look around the typewriter,usually on the left side of the keyboard, and you will see a setting 1,2 or 3
...typing letters wrong It sounds like you have the 10,12,15,PS selector switch on PS with a 10, or 12 print wheel installed. Return to the left margin, move the switch to 10 and type. Most electronic ...
Question about Olympia Office Equipment & Supplies
...type letter H on keyboard the typed letter is different from what I typed and that is the same with every letter. Some of the functions on the key board are activated when I use it together with the ...
...type the letter 'g' Why can't I type the letter 'g'. Whenever the typerwriter power-on the letter 'g' type authomatically. Can you help me please! PROBABLY U HAVE DIRT IN KEYBOARD, IT NEEDS ...
...keyboard is now typing gibberish letters/words. I cannot change to type normal alphabet characters. This happened when I was trying to change the margins. Check to see if the pitch is in proportional ...
Question about Lexmark Office Equipment & Supplies
...Keyboard is not typing correct letters Hold down the "code" key, the one to the left of the spacebar that says "CODE" on it, and hit the "L" key (the one that says (Lang) on it. Should be back to ...
Question about Swintec Office Equipment & Supplies
.......... When i start typing it types wrong letters........help Check the pitch slide switch in the left of the keyboard, it should be in 10 or 12 if it is slide it up and down they do get dirty. ...
...the problem Press code "L" hold down the "L" type 001 to set the keyboard to U.S. If this works you need a keyboard for a permanent repair. For a keyboard contact Geo. Beyers Co. @ 800-392-8085. ...
...type at all. Letter "F" comes out as a different letter, and backspaces and types over itself. Sounds like a keyboard spill. If what was spilled didn,t have sugar or cream in it tou might ...
...typing the wrong letters, make sure the keyboard is set to english, hold down code key and keyboard key together. Good luck! Just had this same problem. I had to reseat the daisy wheel about three ...
441 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions