Look on the Fuel rail on the left and right side, there is usually a cap that looks like a valve cap or a tire. It will have a needle valve inside just like a tire valve, Beware, when you purge the fuel system, make sure the engine is not running or the key is on and make sure the engine is cool. It will spray fuel. Take a blunt end object and push down on the valve pin, be sure to cover your hand with a rag so it don't spray fuel in your face or on your skin. This should purge the fuel system. It may take a couple tries to get all the air out. Allow the fuel to disapate and dry up before you start the engine. This could cause a fire if there is raw fuel laying in the crevises of the engine. An air hose with a blow valve is helpful to dry up the fuel. Again, cover your face or wear safety glasses. I hope this is helpful, I own a 2003 mustang GT my self.
SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?
You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett
317 views
Usually answered in minutes!
×