Questions & Answers for: humidity display on

euro cave 283 1 temp Humidity level display is not working. Any advice on this issue Likely the humidity sensor has gone bad if display is wrong or the display board itself is bad if no display at all

what does LL mean on the humidity display? low temperature/low humidity (LL) Humidity is under 20%.

humidity display fluctuates all over the map from 33 to the low sixties. i would like to be able to set it to a desired humidity level and have it turn on and off automatically as the desired level is

humidity display never increases above 39%, and this morning, it displayed 31%. I have set preferred humidity to 50%, and it is raining outside; there seems to be no reason for the humidity display to

humidity to display. Press MEMORY button again for minimum temperature and humidity to display. Press MEMORY button again to return to current temperature and humidity. 2. Press and hold MEMORY button

...display the actual room humidity. It has a built in hygrometer which will be on the display while it is running. You change it and it shows the actual levels. See page 5 on manual. ...

humidity display window always LO The humidity display window always shows LO. I thought over the winter it was because it was so cold and the humidity was very low, so we turned it off until spring. ...

display shows both time and room humidity also set point humidity , the only way one can tell is on some models there is a tiny light that shows up next to labeled function , easy to miss It , also if

humidity level keeps blinking on display , is that normal on the Albert dehumidifier What does the user manual say about this? That is normal when the room humidity level (as detected by the hygrostat

display and fan and compressor not working Could be the humidity is low enough it isn't turning on. Try to lower the humidity setting to see if it will turn on. Once the humidity gets down to about 50