HF code at 37 min after over filling with water. I unplugged the machine, popped the top (took the 3 torx screws off the back) pulled the small hose off the pressure switch sensor (round sensor on the
washing machine says hf, which means insufficient water intake. I have cleaned the piece that intakes water, but it is still clogged. It is only the cold water intake that is clogged. Do I have to buy
Question about Duet GHW9150P Front Load Washer
...HF on the LED , Any suggestions???? Thanks F/H No water detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering machine and then ...
Question about Duet GHW9150P Front Load Washer
...the seal. Now we tried a load, it didn't leak but it start beeping and flashing the letters H F hf means no water entering unit,,,make sure that there not water in unit already..make sure your ...
Question about Duet GHW9150P Front Load Washer
hf is: hot water fault meaning that the hot water could not enter the machine through the water valve or, the computer did not "see" the water entering. as it expected ( are both of your faucets fully
Question about Duet GHW9150P Front Load Washer
...HF OR FH MEAN ON A DUET WASHER MODEL GHW9150PW0 this error indicates water is not being detected coming into the machine. many things can cause this issue but start here be sure that water valves are ...
...HF what does this mean? Water not getting into machine . Check your hoses and screens to make sure they are clean. If you hear a hum but no water enters machine then they are plugged or shut off . If ...
...and saying FH or Hf ... what does this mean? Check to make sure you are getting a good supply of water to the washer. Remove hoses at the washer and make sure the filter screens are not
Question about Duet GHW9150P Front Load Washer
whirlpool duet washer fills with water washes for about 12 min then code hf Hello, The FH error code means that the washer has not detected any water entering it. This tip i wrote relating to the FH ...
Question about Duet GHW9150P Front Load Washer
Whirlpool duet not feeding softener and getting hf error code The common issue is the pressure switch or the hose connecting the pressure switch to the trap. This is a thin tube from the trap to the ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions