Questions & Answers for: causes glass switch stop working

Question about 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator

2 Answers

...switch that your glass hits is damaged. Do you hear any humming or noises when you put your glass up to get water? door does not dispense water ,but it does make ice...whats the problem..model ...

Ad

Question about 1999 Accent

3 Answers

glass did they check your switch inside your car? as this could be faulty and the switch not connecting properly would cause your wipers to onlywork when the switch "feels like it" :-) Mine was a fuse

Ad

Question about 2004 Expedition

2 Answers

glass a few times to see if that's it. Intermittent Rear Window Wiper System The rear window wiper intermittent speed is activated when the rear window wiper motor module receives ground controlled by

Question about 63682 / 63684 / 63689 Microwave Oven

1 Answer

...switch or anything that can reset my microwave? unplug your microwave; remove the top under the top you will see a small white cylinder (a ceramic fuse) it looks like a glass fuse only made of white ...

...glass back on the track and spray a dry silicone. Hey! i do have the same problem...I tried to clean the window switch for both driver and passenger side and it work for 2 weeks....then i replaced it ...

Question about 1999 Grand Marquis

1 Answer

...causes this? Sometimes the glass will stick to the rubber weatherstripping when the windows are not used for a long time. We have that problem on our 2005 Town & Country, between air conditioning ...

...glass falls down and does not work with the electric switch If you can hear the motor running while pressing the window switch you may have a broken clip or something in the way causing the window to ...

Question about 1998 Accord

1 Answer

...causes a 1998 honda accord ex to lock up an not go in gear If the brake sensor at the pedal brake is malfunctioning, or the cable became unattached, the car will "think" you are not depressing the ...

...causes it to leak when water gets up there. It will go into the vent mode just fine but the same issue when closing from that mode. There doesn't seem to be a "stop" that puts it flush where it is ...

...glass 2x14mm closer Thanks! Hi, If the magnet is what causes the train to switch directions maybe it's lost it's strength or polarity has been reversed at one end by accident. Please reach out ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Refrigerators Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...