I have a jvc xv-n670b and want to unlock the regions. Bought the dvd player in oz but brought all my dvd's from england and want to be able to play them in australia

American DVD players will not play European DVDs because they use different region codes, you can normally play them on computers, but DVD players are normally coded for only one region.

Sorry to say, no; this is a model limitation not a fault as such. XV-N670B is a DVD player, and the playable formats are:

DVD-Video, DVD-RW/-R, +RW/+R, CD, CD-R/RW, SVCD/VCD, WMA/MP3/JPEG, DivX. No Blu-ray support.

The JVC XV-BP11 and XV-BP1 do play Blu-Ray discs, as they are specifically Blu-Ray players (according to the JVC website).

I have heard of quite a few Blu-Ray players allowing DVD playback. The XV-BP1 supports the following playable media: BD-R/RE (Blu-Ray), DVD-Video/-R/-RW, R/ RW, CD, USB (again, this is from the same JVC website). You would need to purchase this or a similar Blu-Ray player to enjoy the benefits it has to offer (but it's up to you if you want one of those later on).

DVDs are still good, the 'disc error' message on your DVD player is normal due to the wrong media format inserted. The bonus here is it didn't cost you anything to ask, and you don't need a workshop quote on repairs.

This is the best free advice I can offer.

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1

Best Regards, Jay__6hyg78

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_rft56

There may be a connection to the problem, but it sounds like the laser assembly may need to be replaced as well as/or the mpeg printed circuit board(the printed circuit board) attatched to the laser assy. Good Luck.

try this one, its not the exact model number but its close enough.

Open tray
Press 0 three times
Brings up a menu
Press 0 for the multi region
Press ENTER
Press PAUSE to exit.

hope this helps

Little Dish Fitter

From another site...

Region code hack posted by mairel, December 18 2007:
A greeting to all, good after point to look for and to break the head, I could convert to multizona my DVD, I count them that I stay fillet. here they go them the procedures, I hope it serves them. 100% guaranteed.

1. Turn on
2. Open the tray
3. Press 0000 in RC
4. Change to any region you want 0 for region free
5. Press Pause
6. Turn off
7. Turn on again and enjoy

hi you can try this it been tested and will work if done correct we just tested this and had no problems unlocking this in the shop lol.




1. Power the player off.
2. Press and hold 'DVD Menu' and 'On Screen' on the player.
3. Power the player back on.
4. Release both buttons.
5. Press Standby. The display should now read either TEST 2, TEST 4, or TEST 6
depending on the machine's current region setting.
6. Press DVD Menu twice on the player.
7. When the display reads 000 5858 use the up and down buttons to change the
000 to 02E.
8. Using the Left and Right arrow buttons, change the last four digits until
they read 0000 for Region Free, 0001 for Region 1, 0002 for Region 2 or 0004 for
Region 4....
NB: DO NOT Use Region 20!!!
9. Press Enter on the player.
10. Press Standby.
11. Wait 5 Second.
12. Press Standby again.
Some titles may not play in region free setting. If this happens select the
needed region.

JVC XV-S332SL, , XV-S402SL,

riz.

Hi!
I would like to ask it,that jvc xv n 316 dvd to a player this firmware is refreshing.