Region free code needed for JVC XV-N670B DVD player

Sorry to say, no; this is a model limitation not a fault as such. XV-N670B is a DVD player, and the playable formats are:

DVD-Video, DVD-RW/-R, +RW/+R, CD, CD-R/RW, SVCD/VCD, WMA/MP3/JPEG, DivX. No Blu-ray support.

The JVC XV-BP11 and XV-BP1 do play Blu-Ray discs, as they are specifically Blu-Ray players (according to the JVC website).

I have heard of quite a few Blu-Ray players allowing DVD playback. The XV-BP1 supports the following playable media: BD-R/RE (Blu-Ray), DVD-Video/-R/-RW, R/ RW, CD, USB (again, this is from the same JVC website). You would need to purchase this or a similar Blu-Ray player to enjoy the benefits it has to offer (but it's up to you if you want one of those later on).

DVDs are still good, the 'disc error' message on your DVD player is normal due to the wrong media format inserted. The bonus here is it didn't cost you anything to ask, and you don't need a workshop quote on repairs.

This is the best free advice I can offer.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_cb7y6

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_4ft6

Try this link: http://www.videohelp.com/dvdhacks/jvc-xv-n322s/5424#30023
1. When "REGION CODE ERROR" shows on screen after you've input your wrong-region DVD you push "ON SCREEN".

2. When the DVD-menu is showing push "ON SCREEN" again and another DVD-menu will appear.

3. Move the arrow over to the clock and press enter. The menu asks for "TIME" and you write 0:00:00 and push enter.

4. You will now see the menu for the movie. Remove the DVD-menu by pushing "ON SCREEN" once. You can now watch the movie.


(Tested and Worked!)


Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by Alex2000, October 31 2009:
Your hack is GREAT!
Works fine on the JVC XV-N342 too.
And right for JVC on the ESS chip:
JVC XV-N320, XV-N322, XV-N330, XV-N332, XV-N340, XV-N342
and so on.
Thanks!

There may be a connection to the problem, but it sounds like the laser assembly may need to be replaced as well as/or the mpeg printed circuit board(the printed circuit board) attatched to the laser assy. Good Luck.

Below is the only known process to unlock that model of DVD player. Does not work on 100% of dvd players.

1. Turn on dvd player
2. Open the tray
3. Press 0000 in the Remote Controller
4. Change to any region you want (0 for region free)
5. Press Pause to confirm your change
6. Turn off
7. Turn on again and enjoy

Hope this works for yours, please post back if it does. Thank you for trying Fixya!

You could try hese two but there not for you specific model. There the closest models to yours i could find codes for. I hope they work fo you. If they don't loo on dvd365.net for another code closeset to your model.

1. Turn on
2. Open the tray
3. Press 0000 in RC
4. Change to any region you want 0 for region free
5. Press Pause
6. Turn off
7. Turn on again and enjoy

Open tray

Press 0 three times

Brings up a menu

Press 0 for multi region

Press Enter

Press Pause to exit.

Hi!
I would like to ask it,that jvc xv n 316 dvd to a player this firmware is refreshing.

yeah me too. damn that dvd player!