JVC Televison & Video - Recent Questions, Troubleshooting & Support

Applicable code(s) will be in the remote control. Use code search to find one for your JVC TV. If a search through all codes in the remote control fails, you may have to try a different one.

JVC Televison &... | Answered on Mar 16, 2018

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.

JVC Televison &... | Answered on Mar 12, 2018

Sounds like a panel issue, you may need a new TV

JVC LT-37X688 37... | Answered on Mar 08, 2018

change the green lamp

JVC AV-56WP74... | Answered on Mar 08, 2018

What type of power supply is in it?..is it a high speed switching supply?

JVC Televison &... | Answered on Mar 06, 2018

then get her a new one .

JVC Televison &... | Answered on Mar 06, 2018

Thank you, everyone! I thought maybe I was losing my mind. I can hardly watch a lot of the TV shows anymore due to the inappropriate use of music -- either it's too loud or there's just too darned much of it. Come on, TV producers! You are supposed to get better with time, not worse! Thank goodness I'm not alone.

JVC AV-32260 32"... | Answered on Mar 04, 2018

go in to the menu and factory reset saying that if its only a month old customer support should come out or at least give you some help hope this helps mark

JVC Televison &... | Answered on Mar 04, 2018

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. /

JVC Televison &... | Answered on Mar 03, 2018

Hi turn the TV off at the power point for a few minutes it should lose it's memory...cheers

JVC AV-65WP94... | Answered on Mar 03, 2018

Not finding what you are looking for?
JVC Logo

Family Lines

9,265 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides