Whare do you plug in your ethenrnet cable i know 1 end goes into the playstation 3 whare does the other end go?

your yellow is the video in, white audio left, red audio right.

· Plug the power adapter into the chair and an outlet.

?· Press the "Wireless" button on the chair console to turn on wireless and choose a channel by pressing the "Channel" button until the light beside the channel goes on.

?· Set the wireless transmitter to the same channel by pressing the channel selection button on the side of the unit. The wireless transmitter requires three AAA batteries to function.

?· Plug one end of the 3.5-inch cable into the transmitter and the other end into the signal splitter.

?· Plug your game console cable into the console. Put the white cable into the white port and the red cable into the red port. Plug the other end into the game port on your television.

?· Plug the 3.5-inch cable directly into the chair's console and press the "Wireless" button to bypass the transmitter if you prefer a wired connection.

If you are sure that you have your TV on the correct input, you can try resetting the PS3's video settings using the following procedure:

1. Before changing cables, make sure the PlayStation 3 is turned off using the main power switch on the back of the PlayStation 3 (the 0 side is pressed down).
   
   
2. Unplug the power cord of the PlayStation 3 and television (or display) from the wall socket.
   
   
3. Make sure the HDMI cable is connected to the [HDMI OUT] port on the back of the PlayStation 3 system.
   
   
4. Connect the other end of the HDMI cable into the [HDMI Input] port of the TV or display monitor.
   
   
5. Plug the PlayStation 3 and television (or display) back in to the wall socket.
   
   
6. Turn the main power switch on the back of the PlayStation 3 back on (the line on the power button is now pressed).
   
   
7. While the PlayStation 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings.
   
   
8. Turn ON the PlayStation 3 and once the system finishes powering up, the Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).
   

If that does not resolve your issue, try the other steps here:
http://us.playstation.com/support/answer/index.htm?a_id=262

there should be some other ports on the router if not it is a modem and you will have to buy a router, just plug a different cable into other router port and the other end into ps3 and presto .If no router buy one and run the one that goes to pc to router internet port than you need 2 cables that that you plug into different ports then to pc and ps3 . you can call me for free advice if none of this makes sence,

by BCA do you mean RCA?

The playstation 2 video cables will work with the playstation 3 as long as it has the weird connector thats only on the PS3 and PS2 lol

http://www.amazon.com/Playstation-PS2-PSX-RCA-Cable-2/dp/B000GACEHQ/ref=sr_1_3?ie=UTF8&s=videogames&qid=1270548672&sr=1-3

lol 98 cents.

if you meant component
http://www.amazon.com/Component-2fV-Cable-Playstation-2/dp/B00005MDZD/ref=sr_1_4?ie=UTF8&s=videogames&qid=1270548672&sr=1-4

You have to connect the wire that has 3 separate wires at the end into your television according to the color. Plug the red wire into the red slot, yellow in the yellow and white in the white. You will then have to take the other end of the wire and plug it into the back of your playstation. Also, make sure to plug your playstation into the electrical outlet.

if you tell me the game I can give you more info but usually you can do them while playing the game and some you go into the menu and choose cheats in options

Try resetting the video output. Follow the steps below:

1. Before changing cables, make sure the PLAYSTATION 3 is turned off using the main power switch on the back of the PLAYSTATION 3 (the 0 side is pressed down).
   
   
2. Unplug the power cord of the PLAYSTATION 3 and television (or display) from the wall socket.
   
   
3. Make sure the AVI cable is connected to the [AVI OUT] port on the back of the PLAYSTATION 3 system.
   
   
4. Connect the other end of the AVI cable into the [AVI Input] port of the TV or display monitor.
   
   
5. Plug the PLAYSTATION 3 and television (or display) back in to the wall socket.
   
   
6. Turn the main power switch on the back of the PLAYSTATION 3 back on (the line on the power button is now pressed).
   
   
7. While the PLAYSTATION 3 system is in standby mode (red light on the front of the system), hold down the touch-sensitive On/Off button on the front of the system until the system goes into standby mode again . (So the light cycle would go from: red light to --> green light --> then back to red light) This will ensure that you have held down the On/Off button long enough to reset the Video Output Settings.
   
   
8. Turn ON the PLAYSTATION 3 and once the system finishes powering up, the Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).

Thank you for using fixya!

If you are talking about the original Nintendo the original cable that came with it will hook up 3 different ways 1) way is through the vcr through the rca inputs ,2)if your tv is capable use an S-video cable. You can also run it through some of the satellite boxes. 3)hook the tv end of the able to the tv and sat to the little box.

i have a tv that only has the audio out put and video out put as well . and my playstation 2 works on it. just plug the white and yellow ends in to your tv and it will still work without you unplugging any cables. hope this helps.