I have a AT&T Call Display 85 Plus (stand alone caller id unit). I can not get it to change from a Spanish Display to an English display.

1. Press the flash/prog button until 1ENG 2FRA 3ESP shows in the display.
2. Use the Caller ID/vol ( + or - ) button or the handset number pad to select 1 (English), 2 (French), or 3 (Spanish). The default setting is 1ENG.
3. Press the flash/prog button to confirm and to advance to the next menu feature.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25861_CAN_EN_CL_IB.pdf

1. Press the flash/prog button until 1ENG 2FRA 3ESP shows in the display.
2. Use the Caller ID/vol ( + or - ) button or the handset number pad to select 1 (English), 2 (French), or 3 (Spanish). The default setting is 1ENG.
3. Press the flash/prog button to confirm and to advance to the next menu feature.

The remote access instructions are on the second page of the manual.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25861_CAN_EN_CL_IB.pdf

1. Press the mute/menu button until 1ENG 2FRA 3ESP shows in the display. 1ENG is
the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)
2. Use the CALLER ID-VOLUME (up or down) button or the touch-tone pad on the
handset to enter your selection.
3. Press mute/menu again to save.

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/25942GE2_IB.pdf

1. Press the mute/menu button until 1ENG 2FRA 3ESP shows in the display. 1ENG is the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)
2. Use the CALLER ID-VOLUME (up or down) button or the touch-tone pad on the handset to enter your selection.
3. Press mute/menu again to save.

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/25932EE1_IB.pdf

I was able to reset my GTE Cidco SA-60A-20 caller ID unit with the following procedure:

1. Remove the battery.
2. Wait several minutes after the display fades away.
3. While holding down the "Delete" key, reinsert the battery.
4. Release the "Delete" key.
5. The unit will come up showing a boot process and end with a screen allowing you to choose the English or Spanish language.

Display Language

1.Press the mute/menu button until >1Eng, 2FRA, 3ESP shows in the display. 1ENG is the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)

2. Use the CALLER ID-VOLUME (Up or Down) button or the touch-tone pad on the handset to select 1eng.

3. Then Press mute/menu again to save.

Please Don't Forget To Rate Our Experts
Thanks For Using Fixya.com
Sincerely,
Michael Scott

1. Press the mute/menu button until 41ENG 2FRA 3ESP shows in the display. 1ENG is the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)
2. Use the CALLER ID-VOLUME (5or6) button or the touch-tone pad on the handset to enter your selection.
3. Press mute/menu again to save.
Yo ucan download the manual here.

http://www.home-electronics.net/ge/pc/IB/25932EE2_IB.pdf

Good Luck

I was able to reset my GTE Cidco SA-60A-20 caller ID unit with the following procedure:

1. Remove the battery.
2. Wait several minutes after the display fades away.
3. While holding down the "Delete" key, reinsert the battery.
4. Release the "Delete" key.
5. The unit will come up showing a boot process and end with a screen allowing you to choose the English or Spanish language.

When a call is received it will automatically set the time and date. To change the display contrast hold down the 'delete' button while toggling one of the other buttons. Hold the delete button down until the 'select,mem,mode' is displayed and choose between '25 name & number' or '64 numbers' . Make sure the batteries are good and the batt indicator in top left corner of display is off. I think that is all the features this early model unit was capable of.

You have to make sure the phone system you have has CID cards in it. What kind of card is in the Electra phone system.