Kenmore 15879 Built-in Dishwasher Logo

Related Topics:

Posted on Dec 12, 2010

Kenmore ultra dishwasher model no 665.16761691 very noisy

5 Related Answers

Anonymous

  • 148 Answers
  • Posted on Dec 21, 2007

SOURCE: Kenmore Ultra Wash Dishwasher wiring diagram

if unavailable on line, contact mfg's parts and you should be able to order it.
also, they likely do not make the unit. the sears may be able to tell you who made it. that company would be able to get you a diagram. just make some phone calls.

Ad

kcfilm

  • 1 Answer
  • Posted on Feb 08, 2008

SOURCE: Kenmore Ultra Wash Dishwasher; Model 665.17539

I have a Kenmore 665 about 3 years old
Over the last couple months the touch pads have stopped working and I am now down to one control the water miser!
Do I need a new control pad and is that easy to install ?
Thank you for any sudgetstions
KC

A

Anonymous

  • Posted on Feb 26, 2008

SOURCE: Kenmore Ultra Wash Dishwasher - 665 - 13783

dcvxzcxzcxzczxc

A

Anonymous

  • Posted on Jun 24, 2008

SOURCE: Kenmore Ultra Wash Dishwasher: Lock On Button Issue

Have to hold the Air Dry button down til your finger hurts. Release button and the light will go off. The "4 second press" in the manual is incorrect!

Anonymous

  • 1 Answer
  • Posted on Jul 15, 2008

SOURCE: My kenmore ultra wash model

my model #665 dishwasher will not pump water into the unit

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kenmore Elite Dishwasher. The red flap/door on the rinse aid will not stay closed. How do I repair it?

There are many Kenmore Elite models with numerical identifiers. You may be able to replace the rinse aid door, or you may have to replace the whole door, if parts are available.

Google

kenmore elite (model) parts

..
0helpful
1answer

Reset for Kenmore Ultra Wash Dishwasher (Model #66517759000)

Assume the "remanufactured" control board has failed.
0helpful
1answer

Not draining completely out and is noisy when running

You might have some hard debris (glass, hard plastic, something else) down in the sump and pump areas. The pump will have to be disassembled to find and fix it. If you're not a handyman, then you probably should call a professional dishwasher repairman.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

0helpful
1answer

Need a owners manual for a ultra wash II dish washer model # 1581591

Is this the correct dishwasher?


http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Dishwasher-Parts/Model-6651581591/0582/0130000?searchedModel=1581591&blt=
1helpful
1answer

Normal wash light blinking, d/w wont start

Wish I could solve this, as I'm having the same problem too. Normal light blinks not matter which wash button is pressed. Cancel light will light, but still NOTHING happens. Same model as yours.
0helpful
1answer

Kenmore Elite model 665.15932 motor is now very

1)check any jam on impeller(motor)
2)check whether bearing plm.(possible replace the bearing)
0helpful
1answer

Kenmore ultra wash dishwasher..

we had the same problem. replacing the $100 part (in the door behind the control buttons) solved the problem. However, now the machine is very noisy.
0helpful
1answer

Decible level for a Kenmore model 16625691 ultra dishwasher

HI,

ACCORDING TO SEARS TECH SERVICE THE AVERAGE DECIBLE READING IS 53.5 DECIBELS


HOPE THIS HELPS. THIS IS ONE OF THE QUIETEST MODELS IN THE CLASS OFFERED BY SEARS.
0helpful
1answer

Kenmore ultra wash 665.16761690

If it is not overfilling, and then leaking, the whirring noise can be a defective water inlet valve, that stays stuck on open, see here : It's overfilling

If it is not overfilling, the two problems may be unrelated, and the noise can be froma foreign object inside the object trap.

See here about leaks and noise

It's noisy

It leaks
15helpful
1answer

Trouble shooting kenmore dishwasher

I have a kenmore ultra wash II Model #1675590 Serial # FC1024731

Will not run and water is standing in the bottom. I have checked the electrical breaker and tried different cycles. Can you help.
Not finding what you are looking for?

228 views

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3808 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...