Question about Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

1 Answer

Normal wash light blinking, d/w wont start

Kenmore ultra wash dishwasher model 665.16034401
serial fs0803045 , the normal wash light blinking,and dishwasher wont start

Posted by on

  • hidden4good Oct 25, 2013

    I have solved it MY WAY!.. Since when it is ONLY the three of us living at home now... I pulled the junk Dishwahser out, and installed more cabinets. I personally wash the dishes (and cook. Wife does cleaning and laundery). The dishes are WAY cleaner and look great! Also, your good sharp knives should NEVER be washed in a dishwasher!!. Plus, the stove is staying cleaner, wipe it off everyday after doing the dishes. Before it was once in a while when I had pans to wash. WE DO NOT MISS THE DISHWASHER!!!.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Wish I could solve this, as I'm having the same problem too. Normal light blinks not matter which wash button is pressed. Cancel light will light, but still NOTHING happens. Same model as yours.

Posted on Oct 21, 2010

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Ultra wash mod.# 665-77963K703. normal wash light flashing. How do I reset.


How many times does it blink before pausing and repeating? 7 times? (That's a common problem - means "water not heating" error.) In some dishwashers, instead of pressing Heated Dry, Normal Wash, Heated Dry, Normal wash, you press the 3 left-most keys in the following order: 1, 2, 3, 1, 2, 3, 1, 2, 3. That will start the diagnostic cycle and clear the error, but if you don't find and fix the cause, the problem will come back the next time you run the DW. But before I try to explain how to fix the root cause, I would need to know how many times the light is blinking.


If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Jan 09, 2015 | Kenmore Dishwashers

1 Answer

Kenmore ultra wash D/W wont start. can cancel things but wont start no heat light and lock on light alternates.


Well, I could be wrong, but is sounds like a bad control module or control console (keypad).

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Jul 20, 2014 | Kenmore Dishwasher With Ultra Wash And...

2 Answers

Kenmore Ultra Wash Model 665.1388 problem the normal wash green light is on heated dry light is on and the start resume light is flashing but wont startup helpppp


see your instruction manual and go to the section troubleshooting and fix it.
if you do not have the i.manual download for free www.retrevo.com or www.fitness.manualsonline.com

see the diagram

God bless you
6_19_2012_3_24_54_am.gif

Jun 18, 2012 | Kenmore Dishwashers

1 Answer

Kenmore ultra wash 665 dishwaser wont start. blinking light


The control panel is most likely defective, take it back.

Aug 22, 2017 | Kenmore Dishwashers

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

2 Answers

Kenmore Dishwasher - Flashing Lights - wont start


Is the clean light blinking 7 times? If so this means you have a problem with your heating element

Dec 03, 2008 | Kenmore 15899 Built-in Dishwasher

13 Answers

Kenmore ultra wash quiet guard 3 dishwasher problem


call sears, 1-800-4MY-HOME. They have a trouble-shooting department that will get rid of this problem. It is caused by water temperature being wrong at the start of the cycle.... blah, blah, blah. The representative will tell you to push a certain set of buttons in a certain order and that unlocks the dishwasher.

Sorry I don't know the sequence

Jun 08, 2008 | Kenmore 24 in. 15689 Built-in Dishwasher

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

12 Answers

Clean light keeps blinking and I can't start a new cycle


Puppa, clear the fault by pressing the keys in this order: high temp scrb--air dry--high temp scrub--air dry. Or, depending on your model..Sani rinse--air dry--sani rinse--air dry. The dishwasher will enter the service mode. Let it do it's thing or advance it through it by pressing the start key. The fault came from the board not sensing a rise in the water temp. Make sure to run the hot water before starting the dishwasher. The heating element runs through the nuetral side of the door switch so make sure the d/w is level and the door switches are all making. The element itself could be at fault. Catriver...post back

Apr 01, 2007 | Kenmore 24 in. 15932 Built-in Dishwasher

Not finding what you are looking for?
Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration  13173 Logo

3,353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ron Rak
Ron Rak

Level 2 Expert

138 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...