My lexmark 5650 wont print pdf dosuments - Lexmark X5650 All-in-One InkJet Printer

you need print drivers... Try this Link
lexmark 5650 driver link

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Hi,
The problems means that for some reason the printer is loosing communication or the print spooler is having problems sending the print job to the printer. Here is a very good article on how to resolve this type of issues. http://bit.ly/aYPFtw

The cartridge is electronically dead. This is a common occurrence from improper refilling. To be correctly refilled it must be done under a vacuum to prevent air from entering the print head, which has likely happened. As ink flows through the print head it acts as coolant in an engine, when air is introduced the print head cannot cool, over heats, and ruins the cartridge. These cartridges are difficult enough for us professionals to refill successfully, my recommendation is to leave it to us, or buy original. A refilled integrated print head cartridge will always continue to read as empty because there is no way to reset the cartridge, the manufactures do this on purpose. Lexmark cartridges in general are designed to only last one cycle anyways, multiple refills is attained only with proper technique.

Your printer is not design for windows 7 for printing.

hi

you can get the user manual with instructions from here
http://images.lexmark.com/publications/pdfs/2007/index/en.html

if your having trouble opening the manual or any other documents install a pdf reader from this page - http://download.cnet.com/Foxit-Reader/3000-10743_4-10313206.html?part=dl-116442&subj=dl&tag=button/

Go here to download manual:

http://www.generalmanual.com/Printers/Lexmark-X5650-All-In-One-Inkjet-Printer.htm

It is in PDF format so you will need Acrobat Reader if you do not have it. The document is 4.5 megabytes and 173 pages in length.

TRY TO REINSTALL THE SOFTWARE AND A DRIVER FOR THAT MODEL DRIVER

How do I change the printer cartridge.

If it didn't come with any OCR software you can find some free OCR software by Googling free OCR. After you have the software installed, it's usually a case of browsing to the scanned image via the software and telling the application to convert the image into a Word document. Some applications have the ability convert to PDF as well. If you prefer a PDF document but your OCR application doesn't support that option, then download some free "print to PDF" software. Typically with this type of software you will not be able to edit a PDF like you will a Word document. Hope I was able to FixYa, please remember to rate my solution. Thanks.

If you installed the software for a disk are you sure that it is for your version(Xp,Vista, 98 etc) of windows?
No lexmark 5600 shown on website. Some other part of it? 5650?
http://downloads.lexmark.com/perl/downloads/downloads.cgi