Panel lights are on. push on button nothing happens

Probably a fuse in the unit. Unplug it and open it. If you see a blown fuse, take it out and look at the writing on the metal part. buy a fuse with the same power ratings.

The button is bad. the flasher is in the fuse panel.

Does it do this in all setting on the dial, normal,heavy ,delicate?

power light is on steady,but cannot tur on

Turn the power button on. It should light the switch. Turn it on from standby, it should light up the front panel. Then the switches should work.....unless one of the buttons got pushed in during shipping and it is still stuck in the pressed position. Check that all the switches push back when pressed.

Button wont stay in - lights up but nothing happens. Machine three and a half years old.

Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Try pushing the little panel with the writing on it just above the push button.

Re-explain please.

I HAD THIS SAME PROBLEM. TRY PUSHING THIS SEQUENCE OF BUTTONS: HEATED DRY, NORMAL, HEATED DRY, NORMAL. THIS RESET MY PANEL AND IT IS WORKING NORMALLY NOW. I FOUND THIS SUGGESTION ON ANOTHER SITE.