Printer only prints in pink

1)Have you tried copying the data from Internet to word application
and then print the word document.
2) Otherwise uninstall driver and re-install it from here
http://www.siliconguide.com/drivers/device/1726/

Deleting the printer and then reinstalling it using the Gutenprint Drivers for the HP 1300 Series in the Add Printer pull down will allow you to print B/W. This works wirelessly over an Airport Extreme, so I assume that it will work wired. I am searching for a solution that prints in color. Amazing that HP and Apple seem content to orphan such a widely-used and relatively recent MFP.

clean head cardrige and calibrate color cardriges.

Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

the photo come out pink and i buy yesterday can you help me hp 1510

hi,
do you installing both cartridges (black and colour)?
if you do so, my advice is to reinstall the driver for your printer.

if you install ONLY the black cartridge, and the color cartridge remain the old one, (which in my opinion is the present case), your problem is from the color cartridge.
The color cartridge have 3 colors and this are: cyan (some kind of blue), yellow and magenta (similar with a pink color, but more intense). The problem is simple: in your color cartridge has left only the magenta color, cyan and yellow tanks are empty.

have 2 options:
1. buy a new color cartridge
2. refill the color cartridge.

HP Deskjet 932C prints only black and pink, even with new color catridge.

I had 3 bad printing cartridges. I went to Staples bought a new 23 and everything is printing fine now.

Assuming you have successfully eliminated cartridge/print head problems, the only other thing to try is to delete the printer software and reinstall [Start/Printers and faxes -right click on the printer icon click delete- install new printer -Have the software disk and handy or select from list- select maker, select model,] I suspect the problem is still print head/cartridge however

Hello we have had customers with this problem and this model printer We came upon this type of problem also exhibited the same lining when you did a nozzle check independant of the computer (not attached to computer and just using the internal head check print) This was a cartridge problem and after replacing the cartridge the problem stopped.