Beep then black screen - HP Pavilion dv6000z Notebook

A black screen and beeps on an Innov-is 4000D sewing machine can indicate a problem with the machine's display or control panel. This could be caused by a few different issues, such as:

1. A problem with the display: The display may have become damaged or malfunctioned, causing the black screen and beeps.
2. A problem with the control panel: The control panel may have become damaged or malfunctioned, causing the black screen and beeps.
3. A problem with the control board: The control board is responsible for controlling the various functions of the sewing machine. If it is not working properly, it can cause the machine to not power on or display correctly, and beep.

It's best to consult the manual or a professional technician for help. They will be able to diagnose the problem and recommend the appropriate course of action. Sometimes, the problem can be solved by replacing a faulty module, repairing or replacing damaged wiring or sensors, but in some cases the repair may be more complex and require more extensive work.
It's important to note that not addressing this issue can cause further damage to the machine, so it's best to have it repaired as soon as possible.

it is likely a motherboard issue and your computer might need repairs

http://www.computerhope.com/beep.htm

READ THIS FOR SAME HELP.

IT IS PROBERLY THE RAM AND VIDEOCARD NEEDS ADJUSTMENT.

I guess you can't go into start button. /anyway how did you know if computing is powered? On your keyboard top line keys have screen control keys for brightness etc.eg f4. try.

This WEB site gives the BEEP codes for the Dell.
http://en.community.dell.com/support-forums/laptop/f/3518/p/19447544/20098900.aspx

The beeping is caused by your computers POST( Power On Self Test - learn something new everyday! ;) )
Find your motherboard manual, and have a look in it for beep codes, or error codes. The number of beeps will let you know what kind of problem you're dealing with.
If all is well in POST, your computer should only beep once, and continue.
Can you get into BIOS at all, or does it just show you your videocard info on bootup, then black screen?

If you can see the bios screen at the boot . After that your screen is black.
The OS might be corrupted I suggest you to reinstall the OS by using the re-installation Disc.

If you are getting any beep sound then the error codes of one long beep & 2 short beep Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information.


If you don't see the bios screen & beeps, there might be problem with the screen or the VGA chip in the motherboard.

If so I suggest you to contact the service center near by.


I am sure this will be helpful for you.

Rate my solution

Regards

Please read below and look at the pictures of failed VIEWSONIC nd othe monitor before try to DIY repair.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net

hello, those beeps you hear usually means some error, and it depends on how many beeps you hear and in which sequence. below you will find several BIOS vendors and their beep codes which help you detect the problem:
http://www.chem.pitt.edu/facilities/bios_beep_codes_list_v3.pdf

hope this help let me know if you need further assistance.
good luck,
regards,

Amar Sondhi

how many times it beeps is an indication of the problem
1 short beep
Normal POST - system is ok 2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem 1 long, 1 short beep System board problem 1 long, 2 short beeps Display adapter problem (MDA, CGA) 1 long, 3 short beeps Enhanced Graphics Adapter (EGA) 3 long beeps 3270 keyboard cardhope this helps.