What year and model is serial #0D102435 in order to purchase control box and cables?

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

This cable can be ordered from our Website. Please have your exact model and serial number ready. The following link will take you to our Tectrix stepper page.

Tectrix Cybex Stepper Parts Climbmax Personal Climber 2000 3000 Model 150...

Here is what worked for me:

1. On the LST-4100A box, there is a black, removable card with an F-connector (Cable In) and a RJ-11 (Data). Unscrew the two retaining screws and remove this card. There is an antenna-type connector on the inside that will need to be disconnected from the card.

2. Connnect the control box to the TV via the serial cable (Display Control).

3. Plug in power cables to TV and control box. Turn on TV.

4. There are two lights on the control box. Make sure the "Power" light is on solid and the "Status" light is flashing quickly. If not, cycle power on both the TV and the control box.

5. Press "Menu" and hold the button until the menu disappears.

6. Quickly, press "2 6 6 3" then press "Enter". A small menu should open in the upper left.

7. Scroll down to "DBox". Change to "Off". TV will restart.

8. Disconnect the serial cable from the TV. The remote controls should now work normally with the control box disconnected.

Hello

Check the following:

* Circuit breaker on main control box is tripped
* Fuse blown (check fuse in main control box assembly).
* Incorrect polarity at battery terminals
* Dead batteries.
* Charging cable is still connected to charging receptacle
* One of the cable connections at the main control box is loose.
* Control connection cable disconnected
* Broken key switch
* Throttle stuck fully open
* Throttle control potentiometer broken.
* Speed potentiometer broken
* Battery voltage too low.
* Faulty charging cable.
* Charger not working.
* Charging circuitry in main control box assembly not working


If these check OK, the problem is likely to in the control connection cable or upper control box Verify that the upper control box is getting 24V. (Blue wire on red connector.)

* If the upper control box is not getting 24V, replace control connection cable

* If the upper control box is getting 24V, check key switch operation and verify wiring in the upper control box. Trace voltage from keyswitch on to find where the problem occurs. (Replace upper control box if necessary.)

* Charge batteries with a 12V charger or replace if necessary.

* Ohm test the charging cable - replace if necessary.

* Test scooter with a different charger, if new charger works, replace charger.

* Check wiring in main control box assembly - replace in line relay if necessary
* If batteries, charger, and all wiring is good, replace controller PCB. (Note the model number for the PCB, for example 1208-2330.)

If you downloaded iWork (30 day trial) it requires a serial number to unlock. if you purchased iWork in a retail box, it does not require a serial number.
It is likely you still have the trial version on your mac. Delete the Apps from your applications folder and reinstall from the disk.

hook out from conveter box composite video to video input on tv

I'm sorry what was your problem again?

With persistence, I was able to program the Universal Remote Control provided with the cable box to control my new used Pioneer SX-315 receiver. I now can control the tv volume, cable box, auxiliary stereo receiver with speaker system with one remote. Thank goodness I did not have to resort to buying a Pioneer remote control.

I was able to program another previously unused universal remote which I purchased several years ago. However, since the other remote control did not list the Vizio TV. That brand is too new for the remote.

Salutation TrudyK,

Great question! First think to know is that if you are getting your programing from a cable or satellite provider a digital converter box would not be needed. These services are not being required to change their signals. If you use rabbit ears or an antenna a digital converter maybe required.

Looking at the specifications of your televisions they all appear to have analog tuners which would need digital converters to receive the new digital broadcasts.

Thankfully the FCC does have a program in place to offer coupons to assist in purchasing the new converter boxes.

For more information on the digital transition and coupon programs BestBuy.com has a FAQS, wuizzes and tutorials available at http://www.bestbuy.com/site/olspage.jsp?id=pcmcat120600050013&type=category

Codually
Jon
Go Ahead. Use Us.

If you are using a cable box try patching the audio from the box to your stereo system. If that does not apply to you, then getting the set fixed or replacement is in order. A colortrack 2000 is like 20+ years old. They don't make them like that anymore., Too bad.
Good luck!