Charter 3 digit codes - Televison & Video

Here you go

Affinity TV codes for Spectrum universal remote controls:
3 digit codesfor UR5U-8780L/8790L, UR3-SR3M/SR3S, etc.
680

4 digit codesfor URC2060, Atlas 5 DVR/PVR, etc.
3577 3716 3717
4 digit codes (Cisco DTA)for Cisco DTA HDA-IR2 & HDA-RF2.2
4071 0881

5 digit codesfor URC1160, URC1060, M2067BX3 & Delta-3068
13577 13717 13716

https://www.eliztech.com/remotes/codelists/affinity-tv-codes-for-spectrum

..

Element TV remote codes
Codes to operate your Element TV:
Newer codes 5 digit:
11886
10178
11687
12183


Older codes 3 digit:
046
005
028
043
048
076
096
155
004
051
127
151
153
154
231
236
238
247
252
168
121
ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.
Your Element TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762

SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control

Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4

Link code for which service provider? See below:

CableVision UR2-CBL-CV04 code: 096
Charter DIGITAL code: 0463
Comcast M1057 code: 0463, 10463
Cox COX code: 0463
Direct TV RC23 code: 10463
Dish Network VIP508 code: 720
Dish Network VIP622 code: 720
Motorola DRC800 code: 0463
One for All URC-6690 code: 0464
Phillips PDVR8 code: 115
Phillips PH5DSS code: 115
Phillips PHDVD5 code: 115
Phillips PMDVR8 code: 115
RCA RCU807 code: 135
Rogers DCT3250 code: 0463
Shaw DCT3416 code: 0463
Sony RM-VL600 code: 8043
TiVo HD code: 0091
TiVo SERIES 3 code: 0091

Would help if you would be more specific, code as in hacking ? Digital content ? Jailbreak ?

Code can apply to lots of categories : Hacking, debug, jailbreak software, exploits, mods, writing code, Developement code!

Be be more specific in your question

0215 0217 0378 0379.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Contact Charter support or contact Arris. ARRIS

Mark
Motorola Support

Using Universal Electronics Charter Remote OCAP 4 Device, I was able to get the volume control to work using the final code in the code listing, 31933

027,022,018,046,073,082 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

I contacted Vizio the other day. They tell me that they use the same generic codes as LG. I have Suddenlink Cable, formerly Charter, so I still use the Charter remote. My remote only needed 3 digits and I have noticed that many need 4 or 5. I can tell you that the LG code worked for my tv. I can power on/off, volume, and change the channel. All other functions require the manufacture's remote. The code I used is 005. There was also 004 but that did not work on my tv. Hope this helps someone!