Lexmark X1100 will not print or reinstall

Make sure the Lexmark X1100 Printer Driver is installed on your computer.
If the printer driver was already installed and working with your computer, please follow steps below:
A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC.

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.
6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.

Try downloading the driver from
http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_X4270&page=product&frompage=null#1
you may have corrupted software.
Let me know if this solves your problem. Thanks.

hello

you need the driver of your printer which is support the windows xp, the driver you have is only for windows 7 you need driver for windows xp. you can search it thru the net.

just leave comments i'll get back to you


thanks

Try disconnecting the printer from the USP Port and re-install the software for the printer. When the software calls for the printer to be connected to the USB, then do so. I have found that most software programs haveto be installed with the printer not connected till told to do so. You may even have to uninstall the printer befor you reinstall the software program. Its worth a try. Bud

Need more info. Any error messages? Did it just stop pumping ink on paper. Are you trying to print black text or color picture? If no error, your cartridges may be empty. If black text does not work, try color picture. Usually one cartridge goes empty and the other still has ink. If color pic prints replace black cartridge. If neither black or color prints at all, it may be a toasted printhead

If you need to reinstall the software, uninstall it, then go to lexmark.com and get new drivers from their site. RESTART COMPUTER! Reinstall from the downloaded file.

If all the above fail to make it work, it is hosed, shop for new printer.

you can get it here http://www.radarsync.com/software/s205764-lexmark_x1100_series just click on the download latest version box ( green with blue arrow ) on the right hand top

electech

sure..go to www.lexmark.com

get the new drivers by model number and operating system

remove the old ones first(add/remove programs)

install

try it


Also, more printer resources are here

Get on the internet, go to Lemark site they have a area for support, and download drivers place on a cd or down load to your desktop. When finished run the drivers and your printer should work. If you can find on lexmark site there are many other sites that have them. Just type Lexmark x1100 drivers and pick a site in your search engine. You should not have to buy them.. Good luck.

Drivers and Downloads

lexmark


riz.

Hi Roger22

you can find a complete .pdf guide thats easy to understand by clicking the link below !

Lexmark X1100 series User Guide.pdf

Worry not , the X1100 series should match your x1150 model installation procedure!

Whatever O/S you use , you can get the Lexmark drivers to match from the Lexmark downloads section for X1100 series below ( also links to other models as well !)

Lexmark X1150 drivers & downloads / Choose your O/S