Need wiring diagram for LFP6152, 110 volt - Fahrenheat Electric Hydronic Baseboard Heater, 240 Volt

Looks like it is too old

https://www.google.com/search?q=road+eagle+12+volts+dc+to+110+volts+ac+power+inverter+model+number+mp-550+rx+wiring+diagram

..

Yep, they are all words. I put them in the right order! :>D

No wiring diagram available and no service manual.

https://www.google.com/search?q=dewalt+dc500+wiring+diagram

It should be 110 volts in, and through a transformer to 18 volts output where is meets up with the 18 volt battery socket and from there to the motor.

..

Contact Century directly to request the wiring diagram.

Only thing needed is to change battery , leave wires alone , unless there is a wiring problem , wiring diagrams are avalible on internet, pdf ...

the condensor gets 240 volts a-c and 24 volts a-c to control contactor. pretty straight forward on this 3 ton unit. the 240 volts comes off breaker box and the 24 volts comes off thermostat and common of transformer.

On 230 volts you have 3 wires 2 are 115 volt and the third wire is ground. As long as you hook the ground wires together correctly the other wires don't matter. Usually the ground wire is either white or green. The black wires are hot (115 volts).

Wiring diagram should appear on side of motor.
Dayton is sold by grainger.
Contact WW Grainger with model number etc and they will send email the pdf file showing wiring.
Take photo of wiring diagram on motor label, and attach to question for best possible chance of accurate answer.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

The wiring diagram is on the outside of the
motor case, on most motors,on the label

Also on the inside of the wiring connection
cover

I have a service manual for the 1600 and 1800 Broaster and it has wiring diagrams in it