What type of GAS and OIL need for the chain saw?

There are a ton of aftermarket parts available for everything. What you need o do is get the oem part number, then search on either amazon.com or simply google... type the part number then oil pump in the search menu...

If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.

You mix 2 stroke oil with the petrol/gas at a rate of 40:1 (40 parts petrol to 1 oil). For longer life use a good quality oil like Husqvarna or Stihl rather than the cheaper types you buy at car service stations.

The oil you use for the chain lubrication is just known as chain oil and can be bought at tool hire outlets.

Make sure you drain the oil when storing your saw. That's because the saw is designed to supply a generous amount of oil to the chain and bar.

chain saws use bar oil to lubricate chain and bar guide if its a gas unit it also needs oil which goes in the gas mixture ratio is on container which can vary

Oleg; Is this your saw? There is no breakdown for the oil pump the entire assembly is <$9, and the worm gear that drives it was <$1.
A link to a Poulan PP3816 Gas Saw Type 2 follows (may not be your saw):
http://www.ordertree.com/modelinfo/PWE/PP3816AV-Gas-Saw-Type-2/75.PP3816AV-Gas-Saw-Type-2.1.59.1.html

If the link is not your saw it can be found here.
The IPL (exploded parts list) for your saw is the only detail for the oil system and it is sketchy at best. Oil components and part numbers are listed but may be on different illustrations. They are also beneficial with disassembly/reassembly:
Poulan.com
http://www.ordertree.com/modelinfo/POULAN-WEED-EATER/75.59.html
The dash number of your serial number is the type.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

The oil to use for the chain is called BAR OIL and if there is anything that might be universal, it is BAR OIL. You can use BAR OIL on electric and non electric saws alike. Self sharpening and non-self shaprening chains. Any manufacturer. It is BAR OIL.

Do not use any other kind of oil in your saw. BAR OIL is particularly sticky and hangs on to the chain even while cutting the wood at high speed.

Thank you for posting your question at FixYa.com

Please remember to vote

a

NONE!!!

I believe the reservoir you are talking about is for the bar chain oil. You can get it most anywhere. As for mixing the gas and oil mixture, you will need 2 cycle oil. It is available most everywhere also. Most modern chain saws use a 50:1 mixing ratio which means 2 1/2 ounces of oil to 1 gallon of gas. Hope this helps.

According to the manufacturer... Use SAE 30 motor oil for best results. (For temperatures below 30° F, use SAE 10. For temperatures above 75° F, use SAE 40.) DO NOT use Bar & Chain oil.