Dyson DC17 Animal Bagless Upright Cyclonic Vacuum "clog disassemble" Questions

...near rear vent hole Try putting the vacuum hose end into vent hole while running. That may dislodge the clog. Otherwise, you will need to disassemble the machine far enough to get to the clog

...goes to the top is clogged and i cannot remove it to clean it out. the clog is stuck and cant get it to move. How to I remove it to undo the clog? must disassemble the airways to access some clogs. ...

reduced power Reduced power is almost always a clog - disassemble hose fittings & passageways & clear out clog. If you have a dog/cat, your chances that the clog is pet hair are about 100%.

...cleaner no suction filter is fine If the vacuum is still functioning, the hose is most likely clogged. Disassemble the vax and unclog. Make sure you drain before disassembling. If possible do ...

...Clear the clog in the hose and you will be fine. You may have to disassemble parts of this machine to assure the clog is gone. Thank you for posting your question on FixYa.com Please vote thanks ...

Dog hair has clogged my steamvac spinscrub nozzle disassemble it carefully until you can access the clogged area and pull that muck out...

...have any suction on my vaccum There is a clog in your hose. You may have to do some disassemble to clear it out ... If you have a ship-vac, it may help you clear the clog. Thanks for your visit

...hard. How do I fix it? your vacuum will have to be completely disassembled. there is probably a clog that created in the cyclone due to the water mixing with the dirt in there. the cyclone assy ...

...disassemble the unit to get to the clog. The flex hose is clear, so the clog must be somewhere else in the vacuum line. Any suggestions? you can try and unscrew things from the bottom. or you can get ...

...clog I can't locate, need to find out how to disassemble Miele upright 17210 vacuum I've gotten to the simple places. but thee's a clog inside the machien that I can't get access to, nor do i see an ...