Canon BubbleJet i560 InkJet Printer "head alignment error 5100" Questions

...alignment. The printer also made a screeching sound when it started to print the page. I just printed out a letter in black and white and it looked fine. What's causing the problem? Hi You can Try ...

...head from going all the way across it will generate this error. You'll want to look hard for ANY obstructions anywhere. Throughly check the gears and rollers for obstructions too. Second the code ...

...head alignment function, service error 5100 appears. Solution 1: Clean the timing strip. Solution 2: The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may ...

5100 when I go to use the head alignment pattern my paper jams up.It won't finish alignment Posting a simple sentence only gets you a simple answer. There is not enough information here to help you...

head alignment procedures did not help. Since the same issue has been seen when printing from different desktop PCs running different versions of Windows, as well as when copying documents, I conclude

head Alignment", it prints half the page and then stops with a 5100 error. The half page that comes out has blocks that sway out of formation, blurry blocks and a white streak down the middle. Is

Ink error I have replaced all of the ink cartridges and I am still getting low ink message together with printer not responding. did you run a head cleaning and alignment? http://tinyurl.com/6qcpgy

...error canon MX432 Chris Bell, thanks for your solution. My Canon MX432 has been blurry for a week. No amount of print head aligning / cleaning / rebooting was going to fix it. I cleaned the "timing ...

...head alignment problem tried relignment acouple times Hi You can Try 2 things. ERROR 5100 means that there is some foreign object blocking your cartridges carriage that disables it from moving. ...

...head alignment and cleaned the heads. Normally the photos are great. I've also done a system restore after I was getting ''service error 5100'' and found no blockages. Try leaving on same settings as ...