Question about Canon PIXMA Office Equipment & Supplies
...and bottom cut- off abt. 3/4". any ideas? when printing a map, starts ok then slowly pulls to left a until paper jams. Verify the fuser unit exit parts,a little paper is jammed,or the roller is
...paper in half lengthwise (so it was skinny and long). Held the printer on my lap with both top and bottom trays open. I noticed the white pegs and skinny black roller inside were ...
Question about Canon PIXMA Office Equipment & Supplies
...preferations. Prints same on blank paper . Set on .50 margin at the top the bottom margin will be almost 1 and 1/2 inches change he wire like if there is black wire and blue wire cut it and exchange ...
...bottom, sometimes cutting off some of the info on that page. Could this be a problem with the rollers pulling the paper thorugh? They are making louder noises than before... and I've tried everything ...
...cuts everything in half! Like it reads the header wrong or blows up the words or make extra spaces. How can I get it to print whats on the screen! I have it set to 8 and a half by 11 and if it all ...
Question about Canon PIXMA Office Equipment & Supplies
...paper feed. Slight warning: The foam bottom below the ink is not secured and will get sucked up by the hose. And note, that I did try vacuuming the intake and interior previously with no improvement. ...
...bottom of that window and put a check on the box that reads: Always print with Current Settings. 4. Click Apply 5. Click OK. Once you are just printing in black and white, the only cartridge you will ...
cut's off bottom of page I am no expert ( a huge understatement). My printer cuts off the bottom 1.5 lines. I have a macbook pro (15 inch)... sounds like a paper size and settings issue
Question about Canon Office Equipment & Supplies
...cuts off the bottom 1/2 inch of paper. I've been playing with it, but it still keeps doing it. I'm very frustrated. Please help. Thanks. Notice where the metal retainer beneath the glass cuts off the ...
Question about Canon PIXMA Office Equipment & Supplies
...bottom? It is likely it is detecting the incorrect size paper. There is usually a number of levers against the paper tray - try removing the tray and verifying the paper is in there correctly - the ...
1,571 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,216 Questions