a blockage. If you remove the hose, if there is suction at the point where the hose hooks to the back of the vac, then the hose is clogged. If no suction there, check filters, make sure they are clean
...cover the hose and feel if the suction got stronger, then replace the hose, if rhat doesnt work find something to push the clog thru the hose and periodically put the hose in to suction the clog
...suction hose. HELP try cleaning out hoses,if that dont work turn it on its side if the roller doesnt spin u need to change belt if it does take the bottom cover and try cleaning out the hole under ...
...suction on the accessory hose, the problem is with a motor filter, HEPA filter, or a clog where the hose goes into the unit. If you have good suction on the accessory hose but none on the floor, it's ...
...suction in the hose Hi- Im attempting to "try" to vacuum the couch and im using the hose but it doesnt seem to working properly. The hose wont pick anything up, there seems theres no suction, and its ...
...up trash and debris. we have an eureka 4495 model and it doesnt want to pick up the dirt off the floor but the hoses are clean and the hose it self has suction and the roller and belt are ok and ...
...suction. Check for any obstructions around the brush roll and clean it if necessary. Check the hose: Check the hose for any blockages or obstructions. Detach the hose from the machine and run water ...
...suction, It hovers ok when i use the hose, I have taken the hover apart and checked all filters, they seem ok. But still doesnt hover up. Any suggestions? Hi. Check brush roller is spinning when ...
Question about Kenmore Vacuums
hose wraps up/suction but junk sticki dust and grass is clinging to the outside, canister is cleaned out and it doesnt swirl around you have a clog in the hose take the screws out of the hose retainer
1,413 questions posted
Usually answered in minutes!
870 Questions
836 Questions
655 Questions
597 Questions
450 Questions