Dyson DC07 Bagless Upright Cyclonic Vacuum "left brush turning cleaning" Questions

...brushes are driven by an air powered turbine. If that turbine isn't turning it may need to be replaced. They can be disassembled and oiled/greased but something like that is better left to a vac

...Brush Belts protruding from the left side (viewing from the front). When I turn the unit on I notice that the Metal Shaft/Sprocket is not turning. While on if I give the flange of the Metal ...

...left side just behind the brush block. Clean the screen then reinstall. Check that recovery tank is properly positioned- lack of seal means less suction which translates to brush block not turning. I ...

...left side of each roller brush. Then slide both roller brushes with the large rubber belt attached all the way to the left so that the cog wheels are against the inside of the left arm. As you move ...

...brush roll area from the top. On the hood of the vacuum, right behind the word Altima, to the right & left sides, you will see a screw. Remove them, lift off plastic hood. Check belt if broken or ...

...the left turns the brushroll on and off You havE a Windtunnel air vacuum cleaner. If the brush roller isn't spinning and the switch is on, you need to pull down the handle to make the roller turn

...left side on floor and turn on. My brush worked again. Amazing! I have the 2003 Yellow dyson... The brush hasn't been working for some time now, but I just noticed it yesterday... When I noticed the ...

...brush protection design - i.e. roller bar on the top of the hood on the left hand side then the DYson can't be repaired by you- serviceman or professional care can replace it. However if the Dyson ...

...brush not working at all. no scrub and no suction The knob on the left side, have you flipped it over to hose? And did the flap open when you flip it over to hose. The tool is bad, if you can take it ...

brush head on the left side as viewed if you are standing directly behind the vacuum cleaner. It is black in color and is recessed slightly into the cover of the brush cover. It is round and about the