Dyson DC07 Bagless Upright Cyclonic Vacuum "belt turning" Questions

i was trying to replace my Kirby Vacuum's belt and when I turned it to belt on it didn't work but the hook hooked the belt when I turned it back to the belt off position! Help! Go to utube Before ...

Kirby g4 belt replacement How U do that? I see the ''belt on'' ''belt off'' signs. Cleaned out vacuum given to me by my Mom and don't know how to get the belt back on. HELP!>> Facing vacuum,turn belt ...

brush froze up and keeps breaking belts the brush won't turn at all, the first belt was broken, replaced the belt and turned on the vacuum and within 30 seconds there was the smell of something ...

...belt, keep turning it until it stops. You will know if the it caught the belt, it will be hard to turn. Put the nozzle back on, lock, then turn the knob in the other direction releasing the belt unto ...

...turning through the belt.does the belt feel loose .when you turn the brush roller by hand does it turn real freely.if it turns real freely and the motor is running then you have the wrong belt on ...

Eureka Boss - Belt is not broke but brush will not turn. I have already turned it over - checked belt - and pushed the reset button. The belt may look fine but they can still be stretched or worn and ...

belt end of agitator with flat sides of slot in cleaner body. 6. Place the three tabs on bottom plate into slots in front of cleaner body. Snap bottom plate into place over agitator. 7. Remove hood by

turning? Replaced with the first belt and as soon as I turned on the vacuum it smelled like burning rubber. That belt broke and now I have replaced it with second belt and the same thing has occurred.

Is there something on the shaft that will not allow the belt to turn? Our vacuum the roller will not turn. It could just be the belt. If the belt is worn or stretched It will not turn the roller brush

...belt not turning? Fuller Brush Vacuum Model FBMM-1PWCF: the belt is not engaging --set to carpet --belt not broken belt worn or stretched Is there a button to turn on brush roller ? Is the handle in ...