Mitsubishi WD-52725 52". Rear Projection HDTV "tv lamp timer" Questions

...lamp replace My tv has been saying the lamp has reached its life for a couple weeks. It finally went dead and I replaced the lamp. The timer light keeps blinking and I can not turn the tv on. Any ...

...tv and turn it on the lamp just flashes very briefly. No TVs will behave that way due to a timer. TVs only will display a nag screen telling you to reset the timer. If your lamp is more than 2 years ...

...lamp replacement, tv does not turn on I will recommend to take the lamp out and slide in again, it might be that your TV havent detect that there is a new lamp. By doing this you will reset the lamp ...

...lamp turned the tv on and the timer blinks green for one minute and then the lamp light blinks orange again. It won't turn on. Can you suggest anything? I have a wd-57731 The lamp light blinked ...

...need to replace the lamp for your TV unit. Also don't forget to replace the lamp use hours timer otherwise the TV unit will not recognize a new lamp has been installed. I hope this helps. Good

...lamp timer The operator's manual has no reference to a lamp timer. The only user setting associated with the lamp is "Energy" for setting the lamp power to Standard or Bright. I'm surprised; ...

...TV. http://www.bluestar-online.com/Mitsubishi_Model_WD_52525_Replacement_DLP_Lamp_p/wd-52525.htm?gclid=COS58_Xr05sCFSENDQoduFtFDA ...

...TV seems to power-up normally. Lamp 3 months old. Timer light solid green, no other lights lit. TV mechanical sounds seem normal. Looking through the vent slots in back, I can see the lamp is lit. ...

...tv goes dark and lamp light glowing solid red. The sequence is:1. TV gets power and timer/power light blinks fast (about 1 minute).2. timer/power light stays steady green.3. seconds later lamp light ...

...mate there is a service menu item, lamp timer.........can be reset.....on remote,menu....2470.....enter.    lamp timer item in option submenu.......good success, meder's tv ...