HP Officejet J4680 InkJet Printer "repair paper sensor design" Questions

...paper jam is gone and the printer works like before. The timing wheel is inside of a black plastic cover at far left of printer. Since I had hard time to remove printer and end up repair it in place, ...

repair Lexmark printers and 2 models that I work on have the same issues and in this case it turns out that the exit sensor is the issue though it is not the sensor itself. What I have found to be the

...paper out and look for that plastic arm - if it's broken, or the spring that holds it in place has come loose, that's the culprit. If that's not the problem, then it's probably going to be something ...

repair. If the paper wrinkles on the end, you probably have a bad paper out assembly. You might try to clean the inside (especially the rear rollers) and replace the paper. If the paper still wrinkles

...repair manual I could fix the old one. MK Just fixed my Brother MFC 845 CW. I had a paper jam and even though I thought I got all the paper out, there was a small piece stuck over on left corner. I ...

...paper in smoothly or not at all. There are 2 solutions that might possibly work to fix this problem. Use a rubber roller cleaner and someone once said you can use Gojo hand cleaner to clean rubber ...

...repair. Please note that when you bring in your machine, there is a service fee for estimation. Brother International stands by its products and strives for excellent customer service. We would have ...

...sensor to say the paper is ready. Just carefully clean them with a little Fantastic or similar cleaner. Thanks for offering that help, but in my particular case, it was shutting down before even ...

repair it. There are numerous small sprins and sensors that control servo motors and these can be easily disturbed by an untrained hand. Thank you, Dana. Hi! I will be glad to assist you in this issue

...Repair it with adhesive tape(Go to page 16 for details) Ink ribbon corresponding to designated number of sheets has been used up.Load a new Ink ribbon and paper roll(Go to 8 ) The ink ribbon is not ...