Sharp Audio Players & Recorders - Page 5 - Answered Questions & Fixed Issues

try cleaning the battery terminals up they sometimes go a bit crusty, hope this helps

There is a short somewhere in the wires going to the speakers.

It is trying to read the disk! If it continues then it does not recognise the cd disk format.....is it an original cd or a copy?

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Sharp Optonica rh ix1056af Sharp Optonica RH iX1056AF

Do a hard reset to this set, and then check. There are two methods to reset. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the device from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand devices are given. Never forget to exit the service mode, after all adjustments have been done.

??? ?????? ??? ??? ?????? ?? ?? ??? ???? ?????? ?? STK 412-490 ?? ???? ???? ???? ????? ?? ?? ???? ?? ??? ??????????? ? STK ?????? ?????? ??? ??? ??? ?? ????? ??? ??????? ???? ???? STK ????? ???? ??? ??? ??? ?? ???? ?????? ??? ???? ??? ?

The main power supply regulator section fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

You can't do it without a remote control. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Part numbers of the speakers:

[12] FRONT SPEAKER BOX PARTS

901 GBOXSA125AW01 BH Wooden Box Assembly

902 CPNLSA055AW04 AY Front Panel Assembly

903 TSPC-A694AWZZ AC Label, Specification

904 LHLDZA177AWM1 AQ Super Tweeter Assembly

905 PCUSGA020AWZZ AB Cushion, Foot

906 XEBY730P10000 AA Screw, M3 x10mm

907 XEPY740P16000 AB Screw, M4 X16mm

908 XESY730P10000 AA Screw, M3 x10mm

SP1,2 RSP-ZA236AWZZ BD Woofer

SP3,4 RSP-ZA179AWZZ AR Tweeter Code first three numbers are layout numbers, then there is the actual part code you can quote. The two letters are a price code which you can ignore and the final bit is the description.

[13] SUBWOOFER

901 GBOXSA070AW01 BG Wooden Box Assembly

902 CPNLSA030AW03 BE Front Panel Assembly

903 HDECQA136AWSB AM Cover, Edge Light

904 HDECQA135AWSB AN Panel, Edge Light

905 PCUSSA013AWZZ AD Port Cushion

906 PCUSGA020AWZZ AB Cushion, Leg

907 XEBY726P10000 AA Screw, M2.6x10mm

909 XMBY740P16000 AC Screw, M4X16mm

910 TSPC-A693AWZZ AC Label, Specification

911 PFLT-A018AWZZ AF Felt A

912 PCUSGA051AWZZ AF Support Cushion

913 PFLT-A020AWZZ AF Felt B

SP1 RSP-ZA077AWZZ BH Speaker Full service manual here. Free http://elektrotanya.com/sharp_cd-sw330.pdf/download.html

Put the red hand to the desired time. On the back there is a knob to twist to set the time.

Wow , mine did the exact same thing . I don't know how to fix it . How weird is this to even happen. CD drawer just comes out, go figure ?!?!? Did you ever resolve ?

Search the internet for: Make + Model + the word "Manual"

There are many online stores that sell this service manual. Here are some links to those stores: Sharp CDMPX100H Service Manual by download Mauritron 2 Sharp CD MPX100H Service Manual SHARP CDMPX100H Service Manual Best of luck!

Derrick, Is that a picture of the stereo in question, I do not see any speakers, do you have external speakers for it.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ Disassemble & reassemble procedure to many popular brand TVs and other devices are given in detail with illustrations.

DO YOU HAVE A MANUEL ,,OR GOOGLE THE MODEL AND MAKE AND CONTACT SHARP CUSTOMER SERVICE IF IS ISN'T TO OLD THEY'LL PROBABLY SEND YOU ONE OR TELL YOU WHERE TO GET IT!!

The only thing that can be is that you have set a timer "sleep" function for that station. I have looked at the manual and it states you can programme a sleep setting for a radio station. The instructions are on page 12. But I have extracted them below:

1 Press the ON/STAND-BY button to turn the power on.

2 Press and hold the CLOCK/TIMER button.

3 Within 10 seconds, press the or button

to select "ONCE" or "DAILY", and press the MEMORY

button. Set the clock to the correct time if "ONCE" or

"DAILY" does not appear.

4 Within 10 seconds, press the or button to select

"ONCE SET" or "DAILY SET", and press the MEMORY

button.

5 To adjust the hour, press the or button and then

press the MEMORY button.

6 To adjust the minutes, press the or button and

then press the MEMORY button.

7 Set the time to fi nish as in steps 5 and 6 above.

8 To select the timer playback source (CD, TUNER, USB,

iPhone/iPod, TAPE or AUDIO IN), press the or

button. Press the MEMORY button.

When you select the tuner, select a station by pressing

the or button, and then press the MEMORY

button. If a station has not been programmed, "NO

PRESET" will be displayed and timer setting will be

canceled.

9 Adjust the volume using the VOLUME control, and then

press the MEMORY button. Do not turn the volume up

too high.

10 Press the ON/STAND-BY button to enter the power

stand-by mode. The "TIMER" indicator lights up and

the unit is ready for timer playback.

11 When the preset time is reached, playback will start.

The volume will increase gradually until it reaches the

preset volume. The "?" or "DAILY" indicator will blink

during timer playback.

12 When the timer end time is reached, the system will

enter the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer operates at the same time every day. It

will continue until the daily timer setting is canceled. Cancel the daily timer when it is not in use.

Sharp seem only to have a user manual, no service manual. If broken it is probably not economical to repair. http://support.sharp.net.au/downloads/opmanuals/HTSB602_om.pdf .