Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 123K Answers
  • 3M Views
0helpful
1answer

Sharp carousel 8888 is flashing and I cannot remove it

In case of unavailability of touch panel regarding any model of your microwave you can simply asked your repairman to install micro touch buttons (easily available and can be fixed) on the base of touch panel than repest the panel over it. It would work like the same.
10/7/2022 5:18:12 AM • Sharp Microwave... • Answered 5 minutes ago
0helpful
2answers

Please tell me how to use the sharp microwave oven r-9h20 model for baking cakes please tell me

I searched using https://www.google.com but did not locate an instruction manual for that model Sharp microwave oven. Recipe at the link below suggests adding extra sugar before baking. https://www.allrecipes.com/recipe/140772/easy-microwave-chocolate-cake/?_ga=2.211667349.160497590.1579435247-959462057.1579435247
10/7/2022 4:51:26 AM • Sharp Microwave... • Answered 31 minutes ago
0helpful
1answer

How do i reset a DK code on a Sharp MX-6070v copier

It needs a new drum unit. It will either reset itself or the tech will do it. https://www.google.com/search?q=reset+a+DK+code+on+a+Sharp+MX-6070v ..
10/6/2022 4:07:46 AM • Sharp Office... • Answered Yesterday
0helpful
1answer

MCK Error code - how to clear

Enter simulation mode, go to SIM24 and reset the main charge (K =black), you must eventually replace the part.
10/6/2022 4:00:44 AM • Sharp Office... • Answered Yesterday
0helpful
1answer

Sharp 14V-R70M Default Service Mode

Hi, First, please check that your one of your tv remote buttons isn't stuck because this could cause your tv to continuously go into a certain mode. You might then attempt to factory reset your tv to stop the service-mode issue. Please reference your device's manual to help with this. Thank you.
10/4/2022 8:31:40 PM • Sharp Televison... • Answered 2 days ago
0helpful
2answers

Sharp ARM207

try typing the error code into a search engine.
10/2/2022 3:31:07 AM • Sharp Ar-208d... • Answered on Oct 02, 2022
0helpful
1answer

Sharp Aquos Liquid crystal tv screen went black but still has sound.

Hi Shannon, if your TV is an LED then more likely the LED strips that are located behind the screen will fail and will need to be replaced. Depending on the age and size of the TV, it might not be economical to get it fixed unless you want to try fixing it yourself. Let me know if you require further assistance.
9/30/2022 3:35:14 AM • Sharp Televison... • Answered on Sep 30, 2022
0helpful
2answers

I have a Sharp LC-40LB601U Rev. B with no wifi or inputs connecting/functioning

Hi, Please use the factory reset option for your tv as described in your manual. And then use the wifi setup instructions to help setup your tv to function as you expect. Thank you.
9/29/2022 7:01:08 PM • Sharp Televison... • Answered on Sep 29, 2022
0helpful
2answers

See sharp crt tv 21ag2-s standby reparing

Hi, Please call Sharp at 1 (800) 237-4277 if you'd like to get your device repaired. Thank you.
9/28/2022 11:05:29 PM • Sharp Televison... • Answered on Sep 28, 2022
0helpful
2answers

Who do i contact when i have and error code d27 on my solar inveter?

Sadly, I think you will find that a Sharp warranty does not cover this type of fault. It is attributed to either a lightning strike or a power surge. Perhaps your utility company could advise you particularly if you have date and time of failure. The inverter will likely have to be replaced and you should confirm that the replacement is legal in your area as some units have beeni banned in wide geographic areas. You might have to try another brand. Other than your utility company, Sharp, or maybe Infinigi, I am not sure who might give you advice. Possibly you might contact the Department of Energy (if in the US) about a grid tied inverter or NREL. Here is information from EVACO: https://ecavo.com/best-solar-grid-tie-inverters/
9/28/2022 4:10:22 PM • Sharp 3150W... • Answered on Sep 28, 2022
0helpful
1answer

80 inch Sharp TV has front indicator with one short flash and one long flash. This is on model LC-80LE650U

Hi, Please first switch power plugs for the tv and remove all attachments outside of what is necessary to power the tv and then check again. If you still have issues, please use the troubleshooting section of your manual to help determine the meaning of the specific flashes that you're seeing. Thank you.
9/24/2022 1:13:49 AM • Sharp Televison... • Answered on Sep 24, 2022
0helpful
1answer

Sharp AR-6020v displaying paper jam and there's no paper in the machine, the machine keeps displaying paper jam please what can I do to solve the problem.

Hi! open the right door and clean the jam detection sensors ( there is 2 or 3 ).
9/22/2022 5:22:29 PM • Sharp Office... • Answered on Sep 22, 2022
0helpful
1answer

Sharp MXM316n I am locked out of the simulation mode. I did the "#" key "*" key "C" key "*" key and then the machine beeps and is just dead. It was calling for Maintenance.

Entering the simulation mode :Machine in Copy mode: Select Program key > Asterisk (*) key > Clear key > Asterisk (*) key > Ready for input of main code of simulation.https://printcopy.info/?mod=ts&brand=Sharp&model=MXM316N&tID=1561
9/21/2022 8:58:24 PM • Sharp Office... • Answered on Sep 21, 2022
0helpful
2answers

MY COPIER IS AR5316 SHARP HAS POOR COPY QUALITY

check the devoloper. see whether toner is flowing free into the devoloper.for immmediate effect mix some toner to devoloper.
9/9/2022 5:12:47 PM • Sharp AR-5316... • Answered on Sep 09, 2022
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Brad Brown

Level 3 Expert

19127 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...