GE Dryers - Page 6 - Recent Questions, Troubleshooting & Support

YouTube video

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

On blower housing and on heater housing.

My ge vas dryer turns on y pushing the button but by releasing the button it won't stay on ?

Most likely, No. It’s probably a loose connection where cord attaches to machine.

this dryer has two motors in it,all of the errors other than the touchpad were for heat problems and most likely caused by a bad blower motor that did fail alot.

Green wire in 4 prong cord is a ground wire. It goes to ground screw that is separate from terminal block, usually right beside electrical opening.

Located on top right of heater housing in some models. You didn’t give a model ??#.

YEP yer glides have worn down to the bearing and need replacing. Click HERE to see the pictoral. If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Less than a month old, take it back to where you bought it

Yes. It not working correctly, a G7 plug might solve it. If not then use a G9. I know double the cost but G9 should fix it for sure.

The video below shows step by step how to replace the heating element in that style dryer: If you need more help you can visit Appliance Error Codes Appliance Error Codes

I put a link some issue which will cause a no start. I notice you changed the fuse it gives some things to check if the thermal fuse is blown. https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Dryer/1-3--/GE-Dryer-won-t-start

REMOVE BACK PANEL