Frigidaire Refrigerators - Page 8 - Popular Questions, Answers, Tips & Manuals

Filter housing may be cracked or o ring defective

Take it back as defective

Hi there, I am not sure what your asking. There are NO user serviceable parts inside the unit- and it sound like your temperature sensor failed or another part related to the sensor or thermostat- also the temperature controller could be damaged- is it out of control in the freezer and fridge? There is not much you can do beside call for help if you have already reset it. good luck

Replace the hose that’s leaking

Google is your friend. Use it. Find the parts manual and discern how to access the handle mounting.

Clogged defrost drain

Hi there, youved just inserted a wrong one and that wont fit inside, check the filter slot maybe you made some disallignment then put it again slowly..thanks

HI error means unit has detected temps are too high in either fridge or freezer. Since you’ve already unplugged it and code came back, you’ll have to determine what’s causing the temperature problems

Damper that controls airflow between fridge and freezer

This is usually caused by a clogged drain hose. Blow air thru it from the back to clear the clog. Good luck, hope this helps. Also make sure door seals are good and doors are closing properly.

you can try notifying frigidaire customer service or will need to order replacement panels

https://www.searspartsdirect.com/refrigerator-repair/error-codes/frigidaire-refrigerator-error-codes.html

There is no reset button. You can try unplugging for 5 minutes to see if electronics will reset.

Either the ice maker or water valve is bad. Is there ice in the form?

The bucket is probably frozen in it mount. Turn off refrigerator until it defrost enough to release it

Check or replace theremostat.

Refrigerant oil leak perhaps. You don’t want to breath that stuff in your home. Need to call licensed technician for inspection or repair. Could also be an old item in your fridge or freezer. Check that in detail before you call the service man.

Whatever sends power to compressor is the problem. Depending on model, either a thermostat or a control board is bad. If it is auto defrost, the defrost timer or control may be bad.

If it’s a defrost problem, entire evaporator will need to be completely thawed. Afterwards, bad defrost components will need to be replaced.

https://www.searspartsdirect.com/partsdirect/user-manuals/fphs2386lf1-frigidaire-parts-manual