Questions & Answers for: whirlpool dishwasher control panel working

Question about 24 in. DU1100XTP Built-in Dishwasher

1 Answer

...dishwasher (Whirlpool 24-inch DU1100XTPQ) stopped in mid-cycle. A small amount of soap was still in the opened soap case and lthere was standing water in the bottom of the washer. None of the control ...

Ad

Question about 24 in. ADG7540 Built-in Dishwasher

1 Answer

whirlpool dishwasher, model # GU980SCGB3. The electronic control panel is not working properly. The only setting I can use is for China. Sometimes the normal cycle will work, but that is becoming less

Ad

Question about Gold 24 in. Built-In Dishwasher Dishwasher

1 Answer

...whirlpool DY 9400 dishwasher that will no longer start. Control panel seems to work fine. Door switch appears to work properly. Any suggestions? have you tested the switch with a tester? check power? ...

Question about Gold 24 in. Built-In Dishwasher Dishwasher

2 Answers

...dishwasher? I had this same problem, ordered the replacement control panel from whirlpool. The new panel worked for two weeks, then stopped working again. OUCH! The replacement part costs $264.34 and ...

Question about MDB7100AWB Dishwasher

1 Answer

...dishwasher control panel is not working what do I do? I had no lights on my control panel, eventhough power was good. I replaced the control panel ($265 part), it worked for 2 weeks, then I now have ...

Question about GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Gold Silent Partner IV Dishwasher - model Anyway, my PROBLEM is that the control panel isn't working!!! At all!!! Only the cancel button works... Do you have any solutions? I think the ...

Question about Gold 24 in. Built-In Dishwasher Dishwasher

1 Answer

...whirlpool gold dishwasher quiet partner 3 I replaced the circuit board already but nothing works. The only thing that works on the control panel is the cancel/drain button. Do I need a new control ...

Question about GU2300XTVQ Builtin Dishwasher

1 Answer

Whirlpool Gold GU2300XTVQ Dishwasher control problem. Started off as some of the wash selection buttons not working. Was able to limp along for a few months by pressing start and the dishwasher would ...

Question about GU2300XTVQ Builtin Dishwasher

1 Answer

...Whirlpool Dishwasher Press and hold lock button for 3-5 seconds. Lock button is usually the heat dry button. Should have a little padlock symbol next to it. If that doesn't work, control panel is

...Whirlpool Quiet Partner Two dishwasher. The rinse only light & quick wash light constantly blink and I can't run it, none of the buttons will work. Is there a way I can reset my dishwasher? This ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...