Questions & Answers for: Xerox Phaser ups fault

Question about Phaser 8500/DN Printer

2 Answers

Fault 37,008,44:21892 This error comes up along with service machine. I cant get into the menu for any options at all...all that shows is this fault. Help, Thanks Printer paper preheater is open cct. ...

Ad

Question about Phaser 8400 Laser Printer

1 Answer

Fault 37,008,44:4501 This fault comes up after powering up the printer. Any ideas? Make sure the printer is plugged directly into the wall outlet and not into a surge protector or multi-outlet strip. ...

Ad

Question about Phaser 7300DN Laser Printer

1 Answer

Tonner is not getting fused. when I print anything the toner does not melt. There is just dust on the paper. if I turn the printer on and off I start working for a little while and then it start all ...

Question about Phaser 8200 Laser Printer

1 Answer

xerox phaser 8200 Won't warmup properly HELP> Phaser states it will not warm up properly. Does it diaplay a fault code? It may take 20-30 minutes to display. I suspect if you leave it on long enough ...

Question about Phaser 8200 Laser Printer

1 Answer

printer not working printer error contact service report fault 15,004.45:207267 That is a drum warm up fault. There are 2, 150 watt halogen lamps in the drum heater that blow. If you want to replace ...

Question about Phaser 8550DX Laser Printer

1 Answer

Fault message comes up after the printer is powered on An error message comes up and says the following; Fault 37,008.44:3232 www.xerox.com/office/8500_8550support I tried to plug it into an ...

Question about Phaser 8400 Laser Printer

1 Answer

...UPS unit, Plug the unit into the wall and power up the printer. If that does not work, then: PEST Fault 37,004.40: xxx Printhead reservoir 0 disconnect: Reservoir is not drawing the expected power ...

Question about Phaser 7750DN Laser Printer

1 Answer

MY XEROX 7500DN when start up gives a error -warming up and hangs up... Your fuser lamp has probably blown. Only solution is to replace fuser. After replacing fuser, you will need to go into diags and

Question about Phaser 7760/YDX Laser Printer

1 Answer

upon startup fault 004-350 occurs upon start up fault 004-350 occurs i tried shutting the power off for 1 min and back on but same problem 004-350 faulty ROS unit or ribbon cable (ros window may be ...

Question about Phaser 7760 Laser Printer

1 Answer

fault 004-350 i had turned the power off and back on but i have the fault 004-350 which i looked up and it says marking device video failure Here is a link for the Phaser 7760 service manual: Xerox ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...