...scanner has a locking device for transport. If it has inadvertently gotten flipped it will cause this issue. Look for the little green or blue tab labeled "Lock" "Unlock" making sure it is
Question about ScanJet 2300C Flatbed Scanner
some scanners have a 'locked' mode which is used to lock the eye in position and prevent it from moving when being transported. perhaps look for this 'lock' switch on the scanner on in the user manual
...make sure there is no "Lock" on the scanner head. some models do have either a slide switch or screw which locked the scanner head into place for transport. refer to your manual to double check
lock lever (used to immobilize the carriage in transport) and move it to locked position, then to unlocked, and power up your unit. Chances are that the carriage was not dislocated when trying to move
...scanner lock/unlock switch for transporting but I would definately check for the switch either on the side of scanner or underneath the scanner and make sure it 's not in the locked position... Hope ...
...transport lock several times to ensure it is not restricting the movement of the carriage. Make sure it is fully open before proceeding to Step 4. Wait 60 seconds before connecting USB or parallel ...
Question about ScanJet 3970 Flatbed Scanner
...lock the mechanism during shipping or transport. Make sure that lever is fully in the unlocked position! HP designed a quick and easy tool that diagnoses and resolves many scanning problems: The HP ...
...has a scanner lock/unlock switch for transporting but I would definitely check for the switch either on the side of scanner or underneath the scanner and make sure it 's not in the locked
the bottom side there is lock for transporting the scanner. Turn the scanner upside down and check. Put it into the unlock position. As I said it is just a guess. If this doesn't work, let me know
...lock (transport lock) is set to the released position. If the switch is set to the locked position, please switch it. [Locked]. Remove Shipping Lock error message on control panel Hewlett-Packard ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions