...and printer ran for 3 lines and stopped and all lights on and are flushing if you clean the carriage path and put oil, the only other things that make that error are the motor CR, replace an
...Flushing count. Again press 2, 7, 8, 3 to reset the flush count. Press Stop. Press 9 and 9 to exit maintenance mode. Job done. Easy, watch video on YouTube. http://www.youtube.com/watch?v=3DSZNhEj3o4 ...
Error 409 Memory full on Monarch 9850 printer Labels that were printing before have stopped working. Error 409, Memory full error occurring. Printer has been turned off/on, also unplugged/plugged. ...
Question about MFC 240C All-In-One InkJet Printer
...printer, all over your desk! It happens! I have seen several messed up desks and carpets stained with ink. To reset the Counter (After you have replaced the parts mentioned) Put the device into ...
Question about OfficeJet 6210 All-In-One InkJet Printer
...printer stopped working. all the lights are flushing Hi 1. Please check the power cord etc are plugged in properly. 2. You may try another power outlet. 3. Please check for any wires / components ...
My printer will not communicate to my printer, and it did recntly. just stopped working a month ago. Do a normal power off (leave the printer powered on) on the computer and after 5 seconds re-power ...
...printer. Below is a synopsis: 1. press menu/set *2,8,6,4 2. Press 8 and 0 keys in order 3. Press Black Start several times until the purge or flushing count appears on the LCD 4. Press 2, 7, 8, and 3 ...
Question about DCPJ125 - DCP-J125 All-in-One Inkjet Printer,
...key several times until the purge (or flushing) count appears on the LCD Then input 2,7,8,3 to reset the purge. Do the same for Flush. Then Press STOP. After input 9,9 to Reboot the machine and ...
How do I stop printing blue spots : ( When I print I get blue spots on the pictures. Any suggestions on what to do? the print head is at fault .The instruction manual will tell you the way to clean it
Question about DCP-J315W Inkjet Multifunction Printer - Colour - Photo Print
...order to reset the purge (or flushing) count. and OK keys.) Press the Stop/Exit key to return to the initial stage of the maintenance mode. 2. The Ink Absorber or Flushing boxes are full. replace ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions