Questions & Answers for: Epson slide control

...CLEAN UNDER GLASS? CAN'T SEEM TO GET APART. UNPLUG THE PRINTER.lift scanner lid from the back, it slides up, underneath there are two screws , one on either side. remove them.under the control

...time I turn the computer on. Since I bought this particular unit because of its ability to scan slides, at this point I feel like scanning the slides that I have and then selling (or discarding!) ...

slide. When printing 8X10 prints of color slides have a border on the bottom and right side of the print. I was able to print borderless 8X10 until now. well this could be caused by a couple of things

control. You can turn it right back on when the drivers are installed and you restart the computer. Good Luck. I had same problem. Slides were all slightly out of focus. My solution was to raise slide

how do i advance my slides with the remote? I HAVE THE SAME DUMB PROBLEM!! Everything works EXEPT moving the slides forward! Anyone have a solution????

...slide over into the appropriate spot. Please help turn it on, flip open the panel to get to the ink, press and hold the ink botton under the paper feeding botton, it'll start to move, then when it ...

I have an Epson Remote controlller 128079900. I I have an Epson Remote controlller 128079900. I cannot advance the slides when projecting. Needed a USB cable!

can't get the remote to advance my slides? If the remote has those buttons, you can purchase a sensor that controls any functions of your computer. Contact ur hardware sales center of choice (best buy

...slide the paper stack straight into the paper feeder tray---along and aligned with the right side of the tray. Secure the stack in place by sliding the left "edge guide" against the paper ...

...the projector ) from the computer to the projector. Once communication is established, normal PPT slide advancing is done by pressing the up/down arrow keys (depending on the remote control