Questions & Answers for: setup cartridges used system initialized

cartridges error to go away, but now I'm back to the ink system failure again, this time with code 0xc18a0207. Any way around that one? Thanks, Gerry Please perform the following steps: A. - Press and

...setup" key and release both keys 3. Press and release the "OK" button 4. Press and release the right arrow button until the display says ?System Configuration Menu?. 2. Press and release the ?OK? ...

...cartridges. Yours Jan Soerensen. 1. Get the unit into the ?Support Menu? by following the steps below according with the product, see the table below: A. - Press and hold the ?left arrow? key. B. - ...

...setup" key and release both keys 3. Press and release the "OK" button 4. Press and release the right arrow button until the display says “System Configuration Menu”. 2. Press and release the “OK” ...

cartridges. Turning it off or unpluggind does not fix it. Can you help? Hi there Solution 1: 1. Press and hold "left arrow" key 2. Press the "setup" key and release both keys 3. Press and release the

...cartridges but can be caused by any cartridge that goes very low on ink and then tries to reload ink. This reset procedure does have to be performed with a full cartridge installed. The following ...

...cartridges This is only some thing you can try it may work. Solution 1: 1. Press and hold "left arrow" key 2. Press the "setup" key and release both keys 3. Press and release the "OK" button 4. Press ...

cartridges still same error code. Please help, need it urgently for home business. Hi there This is only some thing you can try it may work. Solution 1: 1. Press and hold "left arrow" key 2. Press the

...setup" key and release both keys Press and release the "OK" button Press and release the right arrow button until the display says "System Configuration Menu". 2. Press and release the "OK" button. ...

...cartridges If this does not work, you could try a hardware reset. 1) Press and hold LEFT ARROW and then press SETUP Release both buttons 2) Press OK 3) Press & release RIGHT ARROW until LCD reads ...