Questions & Answers for: Canon PIXMA screws stuck

...stuck in the printer and I pulled a hard piece of paper thru to 'clear it out', but I am still getting the paper jam msg. I feel like I've tried everything possible...pls help! Thanks. Sorry can't ...

...screws back in and it started printing again! Good Luck! pixma 450 wont' scan when my conon(pixma mp450) connect to power it show error no.6500 Same problem. Disconnected everything and turned it ...

jamming My computer says there is a paper jam and will not print. Nothing is jammed, it flashes from 3 to E and all three yellow lights are on. When these printer had a jam whatever is stuck in it is ...

paper wont feed all the way through the printer. The paper goes in about an inch or so, then goes sideways and crumples. I have looked for something stuck in the printer, but have not seen anything. I

Paper jam My printer says that it has a paper jam but there is no paper stuck in it. It keep flashing a 3 and E. I have turned it off, tried to reset it. HELP! Thank you Try to check your paper slot..

Loose screw jamming paper in Canon Pixma MP530 printer Small screw has fallen into the left side (facing printer) rear paper feed of MP530 printer. A4 sheets get stuck on this side. How to get into ...

...stuck in printer is inaccessible. Hi All the best The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a few times. Solution 2: Check the purge ...

...is feeding in on right but not on left so just screws up Try turning over and shaking to see if something is stuck in the feed area and try feeding from the bottom tray if the top roller is worn

...stuck Thoroughly check that there is not some foreign object that has fallen into the sheet feeder/ paper path. We commonly find pens, screws, candy and toys that have inadvertantly fallen in causing ...

how do I fix my ink cartlidge when it is stuck on the right side? If catridge is in reach of your fingers then pull it back otherwise you have to open the chasis screw of the printer and pull out ...